Sharper Image 203206 User Manual

3-IN-1 SMART GROOMER

Item No. 203206

User Guide

MAINTAIN A CLEAN, NEAT APPEARANCE

Thank you for purchasing the Sharper lmage 3-in-1 Smart Groomer. This product, along with
the entire Sharper lmage collection, combines innovation with cutting-edge design to provide
you with years of dependability and enjoyment. This 3-in-1 Smart Groomer is designed to
help you trim and groom your facial hair (beard, mustache, sideburns), nose hair, ear hair and
eyebrows to achieve a stylish and professional appearance at home or when you travel. Please
read and follow these instructions, and store them for future reference.

- 1 -

PRODUCT FEATURES

Battery

Cover

Blade Cap

Nose Hair Trimmer
Outer Blade Housing

Power Switch

Nose
Off
Shave/Trim

Shaver Housing

Beard/Moustache Trimmer

Mini Shaver

Shaver Cap

INSTRUCTIONS FOR USE

Installing the Battery Remove the Battery Cover and insert 2 AAA batteries
(not included). Make sure the positive (+) and negative (-) ends of the
batteries are inserted in the battery compartment properly. Replace the
Battery Cover and click into place. Note: Do not mix different types of
batteries. Do not mix old and new batteries. Always dispose of batteries
properly.

Using the Nose Hair Trimmer Remove the Blade Cap by twisting it
counterclockwise. Then, slide the power switch to the “Nose” position.
Carefully place the blade into the nostrils to remove unwanted hair. Use the
same procedure to remove hair from the ear and also trim the eyebrows.

Using the Mini Shaver Remove the Shaver Cap. Then, slide the power switch
to The “Shave/Trim” position. Note: The Mini Shaver is for small hairs. Hairs
should be free of lotion when using the Mini Shaver.

Using the Beard/Moustache Trimmer Remove the Shaver Cap. Then, slide
the power switch to the “Shave/Trim” position. Slide the Beard/Moustache
Trimmer blade forward with your thumb. Note: You can use the Beard/
Moustache Trimmer for small areas, such as hairline, sideburns, etc. Hairs
should be free of lotion when using this trimmer.

CLEANING AND MAINTENANCE

Be sure the Power Switch is turned off before cleaning the device.

Cleaning the Nose Hair Trimmer:

1. Switch the device off.

2. Remove the Outer Blade Housing by twisting it counter clockwise and
raising it off the unit.

On

Open

3. Wipe the Outer Blade Housing with a tissue to remove hairs, dust, etc.

4. Replace the Outer Blade Housing and twist it clockwise to lock it in place.

- 2 -