Snore Stopping Bracelet with Adjustable Wrist Band
Item No. 202404
Thank you for purchasing the Snore Stopping Bracelet with Adjustable Wrist Band. To help you get the most
from your device, Sharper Image has created this user’s guide to better explain its features and operation.
HOW IT WORKS
Your Snore Stopping Bracelet with Adjustable Wrist Band has an advanced audio sensor that listens for loud,
repeated noises such as snoring. When your snoring exceeds 65 dB, it sends a painless electrical current into
your wrist that subconsciously stimulates your muscles and prompts you to change your sleeping position.
After changing positions, you’ll inhale and exhale more smoothly, and snore less, without waking up. Over time
(approximately 2 to 4 weeks), you will notice less snoring, and better nights of sleeping for you and your partner.
FEATURES
• Easy to use
• Trains the wearer to sleep in a better
position for breathing
• Natural and drug free
• Uses harmless electrical pulses
NAME OF PARTS
A
B
C
E
D
• Cordless, battery-operated design
• Flexible, adjustable strap fits wrists up to 9.25”
• Will not turn off if buttons are pressed while
sleeping
• Operates on 1 AAA battery (included)
A. Audio sensor
B. Test button
C. LED indicator
D. Rotary on/off/intensity dial
E. Conducive rubber pads
F. Battery door
G. Wrist band (not shown)
H. Snore Stopper Self-Adhesive
F
Electrode gel pads (1 set, not shown)
BATTERY INSTALLATION
1. Unscrew the battery door and remove it.
2. Insert 1 AAA battery (included), following the polarity diagram inside the battery compartment.
3. Close the battery door and replace the screw.
ITEM SETUP AND TESTING
1. Open the Snore Stopper Self-Adhesive Electrode gel pads, removing the protective plastic film. Do not
throw away the film.
2. Place one gel pad on top of each conducive rubber pad.
3. Strap the device on your forearm, about 1 inch above the wrist joint, with the rotary on/off/intensity dial
closest to your fingers. The device should feel snug, but not tight enough to restrict blood circulation.
4. Activate the device by turning the rotary on/off/intensity dial to the lowest setting (“1” position).
5. When the device makes proper contact with your skin, the LED indicator will flash green.
6. Slowly press the test button three times in a row. In a few seconds, you will feel a harmless electrical
pulse on the back of your wrist. The pulse will last approximately 5 seconds. NOTE: When testing, do not
let your fingers touch the black pads.
7. Now, your device is ready to use. Simply adjust the intensity so that it is enough to prompt you to change
sleeping positions, but not enough to wake you. NOTE: It may take two or three nights to find a level
that’s appropriate for you.
8. When you wake up in the morning, turn the power off to conserve battery power and remove the device
from your wrist. NOTE: For optimum conductivity, keep the gel pads away from dust. Cover them with a
piece of the plastic film when not in use.
SAFETY WARNING
1. NOT FOR USE BY THOSE WITH A PACEMAKER OR HEART DISEASE.
2. Consult your physician before using this or any home medical device.
3. Do not place this product around the eyes, mouth, face or head.
4. Use this device only as intended.
5. Do not wear this device in water or while washing your hands.
6. Keep this device out of the reach of children at all times.
7. If your skin appears unusual after use, please discontinue use immediately and consult your physician.
CUSTOMER SERVICE
If you require any assistance with your Snore Stopping Bracelet with Adjustable Wrist Band,
please call 1 (877) 714-7444, and select Option 3.
Loading...