This user guide is carefully designed to help you learn about
your phone’s features and operations quickly and effectively.
NOTICE
• We strongly recommend that you keep separate permanent
written records of all important data. Data may be lost or
altered in virtually any electronic memory product under
certain circumstances. Therefore, we assume no
responsibility for data lost or otherwise rendered unusable,
whether as a result of improper use, repairs, defects, battery
replacement, use after the specified battery life has expired
or any other cause.
• We assume no responsibility, directly or indirectly, for
financial losses or claims from third parties resulting from
the use of this product and any of its functions, such as
stolen credit card numbers, the loss or alteration of stored
data, etc.
• All company and/or product names are trademarks and/or
registered trademarks of their respective holders.
• Screen layout may differ from that illustrated in this user
guide.
The information described in this user guide is subject to
change without notice.
• All the functions described in this user guide may not be
supported by all networks.
• We assume no responsibility for downloaded contents,
information, etc. from the network.
• Occasionally, a few black or bright pixels may appear on the
screen. Please note that this will not have any impact on any
of the features or on performance.
Copyright
According to copyright laws, the reproduction, alteration and
use of material which is protected by copyright (music,
pictures, etc.) is only permitted for personal or private use. If
the user is not in possession of more extensive copyright or has
not received the explicit permission from the copyright owner
to reproduce, alter or use a copy which has been made or
modified in this way, this is considered to be a violation of the
copyright laws and gives the copyright owner the right to claim
for damages. For this reason, avoid the illegal use of material
which is protected by copyright.
Windows is a registered trademark of Microsoft Corporation in
the United States and/or other countries.
Introduction1
Powered by JBlend™ Copyright 1997-2006 Aplix
Corporation. All rights reserved.
JBlend and all JBlend-based trademarks and logos
are trademarks or registered trademarks of Aplix
Corporation in Japan and other countries.
Licensed by Inter Digital Technology Corporation under one or more of the
following United States Patents and/or their domestic or foreign
counterparts and other patents pending, including U.S. Patents:
4,675,863: 4,779,262: 4,785,450: 4,811,420: 5,228,056: 5,420,896:
5,799,010: 5,166,951: 5,179,571 & 5,345,467
T9 Text Input is licensed under one or more of the following: U.S. Pat. Nos.
5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554;
Australian Pat. No. 727539; Canadian Pat. No. 1,331,057; United
Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463
(96927260.8) DE/DK, FI, FR, IT, NL,PT.ES,SE,GB; Republic of Korea Pat.
Nos. KR201211B1 and KR226206B1; and additional patents are pending
worldwide.
®
®
/Micro3D Edition™
is a registered trademark of HI Corporation
2Introduction
T9 Text Input is covered by the Hong Kong Standard Patent No.
HK0940329 and HK1010924.
T9 Text Input is licensed under one or more of the following: U.S. Pat. Nos.
5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554;
Australian Pat. No. 727539; Canadian Pat. No. 1,331,057; United
Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463
(96927260.8) DE/DK, FI, FR, IT, NL,PT.ES,SE,GB; Republic of Korea Pat.
Nos. KR201211B1 and KR226206B1; and additional patents are pending
worldwide.
microSD™ is a trade mark of SD Card Association.
Bluetooth is a trademark of the Bluetooth SIG, Inc.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by Sharp is under license. Other trademarks
and trade names are those of their respective owners.
Licensed by QUALCOMM Incorporated under one or more of the following
United States Patents and/or their counterparts in other nations ;
4,901,307 5,490,165 5,056,109 5,504,773 5,101,501
5,506,865 5,109,390 5,511,073 5,228,054 5,535,239
5,267,261 5,544,196 5,267,262 5,568,483 5,337,338
5,600,754 5,414,796 5,657,420 5,416,797 5,659,569
5,710,784 5,778,338
®
Flash™ technology by
This device includes RSA
Cryptographic software from RSA Security Inc.
RSA is a registered trademark of RSA Security
Inc. BSAFE is a registered trademark of RSA
Security Inc. in the United States and other
countries.
®
BSAFE™
CP8 PATENT
This product is licensed under the MPEG-4 Visual Patent Portfolio License for
the personal and non-commercial use of a consumer to (i) encode video in
compliance with the MPEG-4 Video Standard (“MPEG-4 Video”) and/or (ii)
decode MPEG-4 Video that was encoded by a consumer engaged in a
personal and non-commercial activity and/or was obtained from a licensed
video provider. No license is granted or implied for any other use. Additional
information may be obtained from MPEG LA. See http://www.mpegla.com.
This product is licensed under the MPEG-4 Systems Patent Portfolio License
for encoding in compliance with the MPEG-4 Systems Standard, except that
an additional license and payment of royalties are necessary for encoding in
connection with (i) data stored or replicated in physical media which is paid
for on a title by title basis and/or (ii) data which is paid for on a title by title
basis and is transmitted to an end user for permanent storage and/or use.
Such additional license may be obtained from MPEG LA, LLC.
See http://www.mpegla.com for additional details.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and
Thomson.
Introduction3
Useful Functions and Services
Your phone offers you the following features:
• Video Calling. You can talk while viewing each other on
respective screens.
• 3D and colour Java™ games and applications with a
graphic accelerator. You can also download various games
and applications from SmarTone-Vodafone via the mobile
Internet.
• Thin Film Transistor (TFT) colour LCD main display with
images that are clearer and easier to view.
• A built-in digital camera for taking pictures and video clips.
• A messaging function for reading and creating SMS and
MMS messages.
• Email for sending up to 300 KB and receiving mail with
attachments.
• A WAP browser for accessing information on the mobile
Internet.
• Your own ringtones and ringvideos. You can use downloaded
sound or video clip files as a ringtone or ring video clip file.
• Playback of the downloaded sound and video clip files.
• A voice recorder function for recording and playing back
voice clips.
4Introduction
®
•A Bluetooth
wireless technology interface for establishing
contact and transmitting data with certain devices. You can
transmit pictures, sounds, and video clips to OBEX-enabled
phones.
• A schedule alarm for creating and sending schedule entries
with alarm settings.
• A microSD™ memory card slot that expands connectivity
with a PC using the memory card.
Out of Warranty List ..............................................131
Index .....................................................................132
Contents7
Getting Started
1
19
20
2
3
4
5
6
7
8
9
8Getting Started
10
11
12
13
14
15
16
17
18
21
22
23
24
25
26
27
1. Earpiece
2. Navigation Keys (Arrow Keys):
Moves cursor to highlight a
menu item, etc.
Up arrow key:
a
Displays the Shortcut menu
when pressed in standby.
a indicates this key in this
manual.
Down arrow key:
b
Displays the Phonebook
entries when pressed in
standby.
b indicates this key in this
manual.
Left arrow key:
c
Displays the list of GSX™ &
Java™ Gallery when pressed
in standby.
c indicates this key in this
manual.
Right arrow key:
d
Displays Galler y when pressed
in standby.
d indicates this key in this
manual.
3. Centre Key:
B
Displays the Main menu in
standby, and executes the
highlighted function.
4. Left Soft Key:
A
5. Send/Redial Key:
D
6. Video Calling Key:
S
7. Voice Mail Key:
G
8. * /Shift Key:
P
9. Microphone
Executes the function in the
lower left of the screen.
Displays Messaging menu in
standby.
Makes or acce pts calls, displays
the call logs in standby.
Makes or accepts Video
Callings.
Long press to connect to the
Voice mail centre. (Depending
on the SIM/USIM card.)
Switches character input
method as follows on the text
entry screen.
In English mode: Abc, ABC,
abc and 123. In T9 mode, T9
Abc, T9 ABC, T9 abc and 123.
In Traditional Chinese mode:
Abc, ABC, abc, 123, and T9
Stroke
In Simplified Chinese mode:
Abc, ABC, abc, 123, T9
PinYin, and T9 Stroke
Press to enter P, ?, – or * in
standby.
Long press in standby to lock
the keypad.
Getting Started9
10. Main Display
11. Sub Camera (Internal Camera)
12. Right Soft Key:
C
13. End/Power Key:
F
14. Clear/Back Key:
U
15. Music Key:
T
16. Keypad
17. #/Silent Key:
R
10Getting Started
Executes the function in the
lower right of the screen.
Shortcut to “SmarTone iN!” by
opening the browser. Press in
standby.
Ends a call and turns power
on/off.
Clears the characters before
the cursor, returns to the
previous screen, etc.
Displays Music menu in
standby.
Displays symbol screen on the
text entry screen.
Long press to switch
languages on the text entry
screen.
Long press in standby to
switch Profiles settings
between the mode most
recently activated and Silent
mode.
18. Built-in Aerial:Warning: Do not cover the
lower part of the phone with
your hand when in use as this
may interfere with the
performance of the built-in
aerial.
19. Portrait ()/Macro () Selector
20. Camera (External Camera)
21. Battery Cover
22. Handsfree Kit Connector
23. External Display
24. Small Light: Used as a battery charge
indicator, Event Light and
Status Light.
25. External Connector:Used to connect either the
charger or a USB data cable.
26. Side Keys (V/W):Moves the highlight up or
down.
Press in standby or during a
call to increase or decrease
the earpiece volume.
27. Voice Recorder Key:Activates the Voice Recorder.
Inserting the SIM/USIM Card and the Battery
1. Slide off the battery cover ().
3. Hold the battery so that the metal contacts of the battery
are facing down, slide the guides on the top of the
battery into the battery slots , and then insert it .
2. Slide the SIM/USIM card into the SIM/USIM holder.
SIM/USIM card
4. Replace the battery cover.
Note
• Make sure that only 3V SIM/USIM cards are used.
• Make sure that the standard accessory battery is used.
Getting Started11
Removing the SIM/USIM Card and the
Battery
1. Ensure that the phone is turned off and that the charger
and other accessories are disconnected. Slide off the
battery cover.
2. Lift the battery using the protruding edge and remove
the battery from the phone.
3. Slide the SIM/USIM card out of the SIM/USIM holder.
4. Hold the battery so that the metal contacts are facing
down and slide them into the slots. Close the cover.
12Getting Started
Battery Disposal
The device is battery-powered. In order to protect the
environment, please read the following points concerning
battery disposal:
• Take the used battery to your local waste depot, dealer or
customer service centre for recycling.
• Do not expose the used battery to a naked flame, immerse
in water or dispose with the household waste.
Charging the Battery
Using the Charger
1. Open and rotate the cover of the external connector
halfway around, connect the charger to the external
socket located on the side of the phone by pressing both
sides indicated with arrows, and connect to an AC outlet.
small light
The small light turns red.
Standard charging time: Approx. 140 minutes
Note
• When you purchase this phone, the battery may not be fully
charged.
• Charging time m ay vary depending on the state of the battery
and other conditions. (See “Battery” on page 126.)
To Disconnect the Charger
When charging is complete, the small light turns off.
1. Unplug the charger from the AC outlet, then unplug the
charger connector from the phone by pressing both
sides indicated with arrows in the figure.
2. Close the cover.
Note
• Do not use any no n-approved chargers as th ey may damage
your phone and invalidate any warranties, see “Battery” on
page 126 for details.
To Charge Using the Cigarette Lighter Charger
The optional cigarette lighter charger supplies power for
charging from the cigarette lighter socket of a car.
Battery Level Indicator
The current battery level is displayed in the upper right of the
main display.
Getting Started13
Low Battery during Use
When the battery is running low, an alarm will sound and
“” is displayed on the main and external displays.
If you are using your phone and you hear the low battery alarm,
attach your charger as soon as possible. The phone may not be
able to continue normal operation if you continue to use it.
Battery IndicatorsCharge Level
Sufficiently charged
Charging recommended
Charging required
Empty
14Getting Started
Inserting/Removing the Memory Card
Note
• Do not push or pull on the card holder excessively as it could
break. The holder is thin and particularly fragile.
• Do not touch the metal terminals with your hands or metal
objects.
• Make sure that the phone is turned off before inserting/
removing the memory card.
• Be sure to insert the card in the correct direction and
orientation.
• Keep all memory cards out of the reach of small children.
To Insert the Memory Card
1. Turn off the phone.
2. Slide off the battery cover.
3. Slide the card holder as shown below in (OPEN)
and insert the memory card as shown in to .
4. Close the cover.
Tip
• You see the following indicators when the memory card is in
use:
: Appears when the card is inserted.
: Appears when the card is damaged or unusable.
Make sure the card is properly inserted.
: Appears when the card is being written to or read.
: Appears when the card is being formatted.
To Remove the Memory Card
1. Turn off the phone.
2. Slide off the battery cover.
3. While pressing down lightly on the cover, slide the card
holder as shown below in (OPEN) and remove
the memory card as shown in to .
4. Close the cover.
Getting Started15
Connecting the Handsfree Kit
1. Open and rotate the connector cover halfway around.
2. Connect the handsfree kit.
16Getting Started
Turning Your Phone On and Off
To turn the power on, long press F for approximately 2
seconds.
To Enter the PIN Code
If activated you are asked to enter a PIN (Personal Identification
Number) code and handset lock code after turning on your
phone.
1. Enter your PIN code.
The PIN code is 4 to 8 digits.
2. Press B.
Note
• If your PIN code is entered incorrectly three times in a row,
the SIM/USIM card is locked. See “Enabling/Disabling the
PIN Code” on page 111.
• If the clock settings have not b een entered, the date and time
entry screen is displayed (p. 104).
To Copy All Phonebook Entries from the SIM/USIM Card
When you insert the SIM/USIM card into your phone for the first
time and start the Phonebook application, you are asked
whether you wish to copy Phonebook entries on the SIM/USIM
card. Follow the on-screen instructions, or you can do it later
using the Phonebook menu as follows:
→
“Call Manager”
“Advanced” → “Copy All Entries”
1. Select “From SIM to Handset”.
Keypad Lock
You can lock the keypad to prevent it from being pressed
accidentally.
Locking the Keypad
1. Long press P in standby.
To unlock, long press P.
Tip
• Emergency numbers (999, etc.) can be entered and dialled
regardless of the keypad lock.
Getting Started17
Display Indicators (Main Display)
Indicator area
Left soft
key
18Getting Started
Centre key
1./: Strength of received signal/Service out of
range
:3G (UMTS)/GPRS
:GSM/GPRS
: Roaming outside network
2.:Off Line Mode [enabled]
3.:Data exchange with external device
4./:Connection to the server [established/
communicating]
5.:Memory card inserted
6./:Voice call [incoming/in progress]
7.//: Video calling communication mode enabled
[voice and video/voice/video]
20.//: WAP/OTA provisioning alerts [WAP alert/OTA
provisioning alert/WAP and OTA provisioning
alerts]
21.:Voice mail message alert
22.:Function Lock enabled
23.:Keypad Lock enabled
24./:Phonebook Search Mode
Getting Started19
Display Indicators (External Display)
Status Indicators
1.:Battery level
2./: Strength of received signal/Service out of
3./:Missed events
4.:Voice call incoming
5.:Video calling incoming
6.:Call in progress
7.:Alerts [messages/Delivery Report]
8. :WAP Push service
9.:Daily alarm enabled
Note
• The above indicators may appear/disappear depending on
the situation.
20Getting Started
range
Navigating Functions
All applications are accessed from the Main menu. To open the
Main menu, press the centre key (B) in standby.
To launch applications, you will need to highlight menu items,
and make selections. To select a menu item (indicated in
quotation marks), move the cursor using a, b, c and d,
and press B to select.
In certain procedures, you will need to press one of the soft
keys (indicated in square brackets), which are displayed in the
lower left and right of the screen. Press the corresponding soft
key (A or C).
To return to the previous screen, press the right soft key if it
displays Back. To close the Main menu, press the right soft key
if it displays Exit.
Each section in this user guide starts with a list of items you will
need to select in order (indicated in italics) before performing
the procedures shown. Select each item to reveal the next set
of items that you have to select. Open subsection items after
opening those listed in the main section.
Example:
→
“Call Manager”
“Phonebook” → “Add New”
Navigating Functions21
Voice Call/Video Calling Functions
Making a Voice Call
1. Enter the area code and the phone number you wish to
dial and press D to dial.
If you enter the wrong number, press U to delete the
number to the left of the cursor.
Emergency Calls
1. Enter 999 or 911 (international emergency number)
using the keypad and press D to dial.
Note
• Emergency calls may not be able to be made on all mobile
phone networks when certain network services and/or
phone features are in use. Contact your network operator for
more information.
• This emergency number can normally be used to make an
emergency call in any country, with or without a SIM/USIM
card inserted, if a 3G (UMTS)/GSM network is within range.
22Voice Call/Video Calling Functions
International Calls
1. Long press Q until a + (international dialling prefix)
sign is displayed.
2. Enter the country code, followed by the area code
(without the leading zero) and the phone number, and
press D to dial.
Adding an Entered Phone Number to the Phonebook
1. After entering a phone number, press [Options] and
select “Save Number”.
For details on creating a new entry, see “Add New” on
page 43.
Showing or Hiding My Phone Number on the Display of
the Called Party
1. After entering a phone number, press [Options] and
select “Hide My ID” or “Show My ID”.
Speed Dialling
Up to 8 phone numbers from the Phonebook memory (Handset
and SIM/USIM) can be assigned to speed dials. You can call the
numbers using the digit keys (G to O). The phone
number of the Voice mail centre is assigned to G.
For details on setting the speed dial list, see “Speed Dial List”
on page 47.
1. To dial a number using the speed dial, long press any of
the digit keys (G to O).
The phone number saved in the speed dial list is dialled.
Redialling
You can redial numbers in the call log. Select from specific
categories or “All Calls”. Specific categories contain up to 30
numbers and the “All Calls” list contains up to 90.
1. Press D in standby.
2. Select the category from “All Calls”, “Dialled Numbers”,
“Missed Calls” or “Received Calls”.
To switch logs, press c or d.
3. Highlight the phone number you wish to call.
4. Press D to redial the call.
Answering a Voice Call
When an incoming call is detected, the phone rings.
1. Press D, B or press [Options] and select “Answer” to
answer the call.
Or press any key (except F, U and [Busy]) when the
“Any Key Answer” function is enabled. Set the Any Key
Answer function in the profile of each mode (p. 100).
Tip
• If you have subscribed to the Calling Line Identification (CLI)
service and the caller’s network sends the number, the
caller’s number is displayed on the screen. If the caller’s
name and number are saved in the Phonebook, the caller’s
name is displayed on the screen.
• If the number is a restricted number, the display shows
“Withheld”.
• When you receive a call from the person whose picture is
registered in the Phonebook, the picture, name and phone
number are displayed.
Voice Call/Video Calling Functions23
Rejecting an Incoming Call
1. Press [Options] and select “Reject Call” while the phone
is ringing to reject a call you do not wish to answer.
Forwarding an Incoming Call to the Voice Mail Centre
1. Press [Busy] or F while the phone is ringing to forward
the call to the Voice Mail centre.
Incall Menu (Voice Call)
Your phone has additional functions available while a call is in
progress.
Adjusting the Earpiece Volume
During a call, you can adjust the earpiece volume (and
handsfree kit volume, if connected).
1. Press V or W to display the Earpiece Volume screen.
2. Press V (or a/d) to increase the volume of the call or
press W (or b/c) to decrease the volume.
3. Press B when the volume is set to the desired level.
Turning the Speaker On and Off
You can talk via the loudspeaker on the back of the phone by
turning it on.
1. During a call, press [Options] and select “Loudspeaker
On”.
24Voice Call/Video Calling Functions
Putting a Call on Hold
This function allows you to manage two calls at the same time.
If you wish to make another call while you are talking to
someone, you can put the current call on hold to call someone
else.
To Make Another Call during a Call
1. During a call, press [Options] and select “Hold”.
The current call is put on hold.
2. Press [Options] and select “Dial New Number”.
3. Enter the phone number you wish to make another call
to, then press D.
Tip
• You can also make another call by entering the phone
number during a call instead of step 1. The current call is
automatically put on hold.
Accessing SMS/MMS Menu during a Call
1. During a call, press [Options] and select “Messages”.
The following options are available: “Create Message” to
make an SMS and MMS, or “Inbox”, “Sent” or “Drafts” to
access these folders. For details on SMS, see “SMS” and
“MMS” on page 56.
Call Waiting
This service notifies you of another incoming call while you
have a call in progress.
1. During a call, press [Options] and select “Hold &
Answer” to answer the second call.
The first call is put on hold and you can now talk to the
second caller.
Note
• You need to set “Call Waiting” to “On” if you use the Call
Waiting service (p. 107).
• Call Waiting service may not be available on all networks.
Contact your network operator for more information.
• If you do not wish to answer the second call, press [Options]
and select “Busy” in step 1. If “Reject” is selected, the log of
the second call is saved as a missed call.
Conference Call
Conference call is a call with more than 2 participants. You may
include up to 5 participants in a conference call.
To Make a Conference Call
You must have one active call and one held call.
1. During a call, press [Options] and select “Multi Party”.
2. Select “Conference All” to join the conference call.
3. Press F to end the conference call.
Note
• The conference call service may not be available on all
networks. Contact your network operator for more
information.
• You have more options for the Conference call in step 2:
• To put all participants on hold, select “Hold All”.
• To put all participants except the current call on hold,
select “Private”.
• To end the call with all participants, select “End Active
Call(s)” or “End Held Call(s)”.
• To reject adding more participants to the current party,
press [Options] and select “Reject”, or you can forward
the call to the Voice Mail centre by selecting “Busy” or
F.
Voice Call/Video Calling Functions25
To Add New Participants to the Conference Call
1. Press [Options] and select “Dial New Number”.
2. Enter the number you wish to include in the conference
call and press D to dial.
3. Press [Options] and select “Multi Party”.
4. Select “Conference All” to join the conference call.
If you wish to add other participants, repeat steps 1 to 4.
To End the Call with a Conference Call Participant
1. During a conference call, highlight the person that you
wish to disconnect from the conference call.
2. Press [Options] and select “End Active Call(s)” or “End
Held Call(s)”.
26Voice Call/Video Calling Functions
To Have a Private Conversation with One of the Participants
If you wish to have a private conversation with one of the
participants, you may select the participant from the
conference list and put the other participants on hold.
1. During a conference call, select the person that you wish
to talk to.
2. Press [Options] and select “Multi Party”.
3. Select “Private”.
4. Once you have finished the private conversation, press
[Options] and select “Multi Party”.
5. Select “Conference All” to return to the conference call.
Muting the Microphone
1. During a call, press [Mute].
To unmute the microphone, press [Unmute].
Making a Video Calling
Note
• Use this function with only the video calling enabled phones.
• Make sure that the battery is fully charged and the signal is
strong before using this function.
• Turn the loudspeaker on or use a handsfree kit so that you
can talk while looking at the video calling screen on the main
display.
Making a Video Calling
1. Enter the area code and the phone number you wish to
dial and press S, or press [Options] and select “Video
Calling” to dial.
If you enter the wrong number, press U to delete the
number to the left of the cursor.
When the line is connected, the image of the called party is
displayed upper on the screen, and yours lower left.
Tip
• If the called party’s phone is not video calling enabled, you
can press F and enter the phone number again to make a
voice call.
Answering a Video Calling
When an incoming call is detected, the phone rings.
1. Press S or D to answer the call by video or press
[Options] and select “Hide Picture” to answer with voice
only.
Tip
• If you have subscribed to the Calling Line Identification (CLI)
service and the caller’s network sends the number, the
caller’s number is displayed on the screen. If the caller’s
name and number are saved in the Phonebook, the caller’s
name and phone number are displayed on the screen.
Rejecting an Incoming Call
1. Press [Options] and select “Reject Call” while the phone
is ringing to reject a call you do not wish to answer.
Forwarding an Incoming Call to the Voice Mail Centre
1. Press [Busy] or F while the phone is ringing to forward
the call to the Voice Mail centre.
Voice Call/Video Calling Functions27
Incall Menu (Video Calling)
Muting the Microphone
1. During a video calling, press [Mute].
To unmute the microphone, press [Unmute].
Switching Images
You can switch images between the main and sub screens.
1. During a video calling, press [Options] and select
“Switch Images”.
Tip
• You can also switch images between the main and sub
screens by pressing B during a video calling.
Changing the Image of Yourself
1. During a video calling, press [Options] and select
“Camera Picture”.
2. Select “Internal Camera”, “External Camera” or
“Alternative Image”.
“Internal Camera”:The image through the internal
camera is displayed and sent to
the party.
“External Camera”:The image through the external
camera is displayed and sent to
the party.
28Voice Call/Video Calling Functions
“Alternative Image”:The camera is turned off and the
image selected in “Alternative
Image” of “Video Calling
Settings” (p. 110) is used.
Tip
• You can also switch the image shown to the caller by
pressing c or d during a video calling.
Turning the Speaker On and Off
You can talk via the loudspeaker on the back of the phone by
turning it on.
1. During a video calling, press [Options] and select
“Loudspeaker On”.
Note
• In a high-noise environment, you may not be able to
continue a call, or make a clear call. We recommend that you
use the handsfree kit.
• With this option, you may not be able to continue a call
without interruption if you increase the earpiece volume. We
recommend that you decrease the earpiece volume or use
the handsfree kit.
Video Calling Settings
To Change the Quality of the Incoming Image
You can adjust the quality of the called party’s image.
1. During a video calling, press [Options] and select “Video
Calling Settings”.
2. Select “Incoming Picture Quality”.
3. Select “Normal”, “Quality Priority” or “Frame Rate
Priority”.
“Normal”: The standard quality is used.
“Quality Priority”: The quality of the picture takes
precedence over the frame rate.
“Frame Rate Priority”: The frame rate takes
precedence over the quality.
To Turn the Backlight On or Off
You can turn on the backlight of your screen.
1. During a video calling, press [Options] and select “Video
Calling Settings”.
2. Select “Backlight”.
3. Select “Always On”, “Always Off” or “As Normal
Setting”.
When “Always On” is selected, the backlight will always be
on during a video calling.
When “As Normal Setting” is selected, the backlight will
time out depending on the Backlight setting (p. 102).
To Adjust the Video Exposure
1. During a video calling, press [Options] and select “Video
Calling Settings”.
2. Select “Exposure”.
3. Press a (Bright) or b (Dark).
Mirror Image
During a video calling, you can reverse your image on the sub
screen.
1. During a video calling, press [Options] and select “Video
Calling Settings”.
2. Select “Mirror Image”.
3. Select “On” or “Off”.
To Change the Sub Camera Image to the Alternative Image
During a video calling, you can switch the image shown to the
caller between the sub camera image and an alternative image
or display an image while putting a call on hold from the saved
picture files.
1. During a video calling, press [Options] and select “Video
Calling Settings”.
2. Select “Alternative Image” or “Hold Guidance Picture”.
3. Select “Preset Picture” or “Picture Gallery”.
Voice Call/Video Calling Functions29
Using the Menu
Top Menu
1. Press B in standby.
The Main menu is displayed.
2. Press a, b, c or d to highlight the desired menu,
then press B to access the function.
The sub menu is displayed.
For details on the menu options, see “List of Menu
Functions”.
30Using the Menu
List of Menu Functions
Menu No./Main MenuMenu No./Sub Menu1
1 Games & Applications
2 Browser
3 Organiser
1 GSX™ & Java™ Gallery
2 Set Java™ Wallpaper
3 Java™ Settings
4 Java™ Information
1 Homepage
2 Go to URL
3 Bookmarks
4 Alert Inbox
5 My Saved Page
6 Access History
7 Browser Settings
8 PLUS
9 News
10 Music
11 Games
12 Sports
13 What’s New?
14 Email
1 Calendar
2 Alarms
3 Calculator
4 Voice Recorder
5 Stopwatch
6 Tasks
7 World Clock
8 Countdown Timer
9 Expenses Memo
10 Phone Help
Loading...
+ 106 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.