SHARP SP2328 Technical Report

COPIER : SF-2025

Date

Sep. 24, 1998

No. : SP-2328

MEASURE TO ALLEVIATE PROBLEMS OF JAMS IN THE FUSING SECTION DURING DOUBLE-SIDE COPY OPERATIONS.

1.Model Name: SF-2025/2030/2040

2.General: There was a problems with copy paper jams occurring in the fusing section during

double side copy operations. The jams were caused by curling of the copy paper, causing it to ride up onto the fusing guide. As a measure to alleviate this problem, the action described below has been carried out.

3.Description:

Guide cover FCZZ →FCJ1

Added fusing guide sheet

4.Action: ∗ Japanese domestic production: From the 1st lot of 1998 August production.

Chinese (SOCC) production: From the 1st lot of 1998 September production.

SHARP CORPORATION Reprography Division

1/2

Green

Ref.

Model

No.

SF-2025 SF-2030

SF-2040 18 -67

SF-2025 SF-2030

SF-2040

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

19 -67

All

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

PCOVP1160FCZZ PCOVP1160FCZ1 AK HR upper guide cover

---- PSHEP4506FCZZ AE Fusing guide sheet 6

Price

rank

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Parts name

Effec-

tive

time

∗

Inter-

change-

ability

Note

2/2