Page 1
COPIER : SF-S56
Date
:
Aug. 3, 1998
1. CHANGE IN THE SHAPE OF THE LOWER INSIDE COVER CARRIED OUT AS A
MEASURE TO IMPROVE PRODUCTIVITY.
2. ADJUSTMENTS CARRIED OUT AS A MEASURE TO ALLEVIATE PROBLEMS OF
DIAGONAL FEEDING OF ORIGINAL COPIES FROM THE RADF.
3. CHANGE IN PARTS INSIDE THE DESK CARRIED OUT AS A MEASURE TO
IMPROVE PRODUCTIVITY.
No. : SP-2313
1. Change in the shape of the lower inside cover carried out as a measure to improve
productivity.
1.Model Name: SF-S56
2.General: A change has been carried out in the lower inside cover (P/G [5]-6) in the attachment
kit. This action has been carried out as a measure to establish standardization of the
lower inside cover with other models. The old parts are interchangeable with the new
parts and therefore there has been no change carried out in the parts code.
Old
3.Action: From 1998 July production.
2. Adjustments carried out as a measure to alleviate problems of diagonal feeding of
original copies from the RADF.
1.Model Name: SF-A57/A18/A56/A17
The corner section has been cut.
New
2.General: A change has been carried out in the screw hole of hinge L. The round screw hole has
been changed to an oval screw hole. This action has been carried out as an adjustment
measure to alleviate problems of diagonal feeding of original copies from the RADF.
SHARP CORPORATION Reprography Division
1/4
Green
C
Page 2
Old
Hinge base L
The round screw hole has been
changed to an oval screw hole.
New
3.Action: AR-AF1: From 1998 August production.
M5 screw
Others: From 1998 July production.
3. Change in parts inside the desk carried out as a measure to improve productivity.
1.Model Name: SF-D23
2.General: A change has been carried out in some of the parts used in the desk, and other parts
have been discontinued. This action has been carried out as a measure to improve
productivity. Please refer to the parts list for details concerning the changes that have
been carried out.
3 - [3]
The E-groove has been
discontinued in accordance with
the discontinuance of the E-ring.
0CW4051K317//
0CW4051K317C/
3 - [4]
2/4
3 - [5]
3 - [10]
Page 3
3 - [11]
3 - [13]
0CW4051K521//
Size SW harness
Discontinued
(CN8) Connector
LTR
0CW4067K530A/
0CW4051K533A/
A4
0CW4067K531A/
3 - [15]
0CW4051P111//
0CW4051P1111/
Added making
3/4
Page 4
Ref.
Model
name
Version P/G No.
1 -17
57 0CW4067P314// 0CW4067P314C/ AL Support band
No.
SF-A56
SF-A17
2
SF-A57 BD
SF-A18 0CW2215K031// 0CW2215K031/ AL
3-[1]
3-[2] 57 -28 0CW4051P040// 0CW4051P040G/ AQ JAM cover
Current parts New parts
Parts code Parts code
0CW2214K021// 0CW2214K021L/
Price
rank
BG
Parts name
Hinge L ASSY
Effec-
tive
time
1st lot
'98/7
1st lot
'98/3
1st lot
'98/4
Inter-
change-
ability
3
1
Note
∗ 1
3-[3] 57 -25 0CW4051K317// 0CW4051K317C/ AK Link arm K ASSY
3-[4]
3-[5] 58 -18 0CW4051P236B/ AV Pick arm C shaft ∗ 4
3-[6] 58 -1 0CW4051P340// 0CWBLT00183// AP
3-[7]
3-[8] 58 -28 0CW4051P020// 0CW4051P020F/ BC Transport base plate
3-[9] 58 -34 0CWPW060050// Discontinued ---- Washer
SF-D23
3-[10] 58 -9 0CW4051P237// 0CW4051P237E/ AP Pick arm B shaft ∗ 3
3-[11] 58 -25 0CW4051K521// 0CW4051K533// AX PBA-interface PWB
3-[12]
3-[15]
3-[16]
3-[17] 61 -5 0CW4051P007// 0CW4051P0073/ AX Main lifter
3-[18] 61 -31 0CW4051P376// Discontinued ---- Sheet
All
U.S.A.
Canada
U.K.
Australia
SEEG
All
58 -18
58 -3
59 -3 0CW4067K500I/
61 -1 0CW4051P111// 0CW4051P111I/ BA Paper side guide unit
61 -2
0CW4051P238//
0CW4051P339// 0CWBLT00184// AQ
0CW4051P359// Discontinued ---- Upper limit label
0CW4051P238F/ AU Pick arm A shaft
Belt
0CW4067K517H/
BT PBA-control PWB
0CW4067K518H/
1st lot
'97/10
1st lot
'97/11
1st lot
'98/5
1st lot
'97/9
1st lot
'98/7
1st lot
'98/3
1st lot
'98/4
∗ 2
∗ 3
2
1 ∗ 5
2 ∗ 6
6
1 ∗ 7
4 ∗ 8
∗ 9
5
∗ 10
4/4
3-[19] 55 -18 0CW4051P385// 0CW4051P384// AZ Caster 100
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
∗ 1 Change carried out in the material.
∗ 2 Discontinued groove carried out in accordance with the discontinuance of the E-ring.
∗ 3 Discontinued E ring groove.
∗ 4 Removed shaft hole. ∗ 5 Change carried out in the width of the belt.
∗ 6 Added rib. ∗ 7 Connector (CN 8 has been discontinued).
∗ 8 Discontinued bushing SW, discontinued dip SW.
∗ 9 Discontinued label, stamped mark to the guide.
∗ 10 Discontinued sheet in accordance with a change carried out in the shape of the lifter.
∗ 11 Discontinued stopper.
1st lot
'98/3
1 ∗ 11
Loading...