SHARP SP2307 Technical Report
COPIER(OPTION) : SF-S56, SF-A18/A57
Date
:
Jul. 22, 1998
1. ADDITION OF A SCOOP FIXING PLATE CARRIED OUT IN
THE STAPLE UNIT.
2. ESTABLISHMENT OF STR-Z2151 SERVICE PARTS IN THE
POWER SUPPLY PWB.
No. : SP-2307
1. Addition of a scoop fixing plate carried out in the staple unit.
1.Model Name: SF-S56
2.General: The addition of a scooping plate which was carried out as a measure to improve
interface performance during stapling operations was reported in T/R SP-2287, but
there were problems of the scooping plate becoming deformed when tightening the
screws of the unit. As a measure to alleviate this trouble, the addition of a scoop fixing
plate has been carried out.
Scooping plate
3.Action: From the start of 1998 April production.
Scoop fixing plate
Scooping plate
SHARP CORPORATION Reprography Division
1/2
Green
C
2. Establishment of STR-Z2151 service parts in the power supply PWB.
1.Model Name: SF-A18/A57
2.General: The establishment of one of the parts in the power supply PWB (STR-Z2151) as a
service part has been carried out. This action has been carried out in accordance with a
request from the market.
STR-Z2151
(0CW2223P430//)
2/2
Ref.
Model
No.
1 SF-S56
SF-A18
2
SF-A57
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
name
7
All
1
New type cannot be used in place of current type.
New type can be used in place of current type.
Current parts New parts
Parts code Parts code
0GZFB49647000 AN Scoop fixing plate
---0CW2223P430// BE STR-Z2151 ----
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
Price
rank
Parts name
Effec-
tive
time
1st lot
'98/4
Inter-
change-
ability
6
Note
Loading...