SHARP SP2302 Technical Report

COPIER : SF-2025
Date
:
Jul. 10, 1998
1. CHANGE IN THE MATERIAL USED FOR THE ATTACHMENT PLATE OF THE GUIDE SWITCH IN THE TRANSPORT UNIT CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY.
2. CHANGE IN THE MATERIAL OF THE LOWER GUIDE OF THE 500 TRAY PAPER FEEDING UNIT CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY.
3. CHANGE IN THE SHAPE OF THE ADU OF THE ROLLER ARM CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY.
No. : SP-2302
1. Change in the material used for the attachment plate of the guide switch in the transport unit carried out as a measure to improve productivity.
2.General: A change has been carried out in the material used for the attachment plate of the
guide switch in the transport unit. This action has been carried out as a measure to improve productivity. In addition to this change the tapping of the attachment holes for the guide switch has been discontinued and the screws have also been changed.
Guide switch attachment plate
Changed screw XBPSD30P14000
XHBSD30P14000
3.Action: Running change carried out from 1998 mid-June production.
2. Change in the material of the lower guide of the 500 tray paper feeding unit carried out as a measure to improve productivity.
Changed screw XBBSD40P10000
XHBSE40P10000
2.General: A change has been carried out in the material used for the lower guide in the 500 tray
paper feeding unit. In addition to this change, a stopper of the pick up roller has been discontinued in one location. This action has been carried out as a measure to improve productivity.
SHARP CORPORATION Reprography Division
1/3
Green
C
Changed material
Discontinued
3.Action: From the start of 1998 June production.
3. Change in the shape of the ADU of the roller arm carried out as a measure to improve productivity.
1.Model Name: SF-DM11
2.General: In accordance with a change that has been carried out in the inner diameter of the
clutch spring, a change has also been carried out in the inner diameter of the ADU of the roller arm. This action has been carried out as a measure to improve operationability. Details concerning the change that has been carried out in the clutch spring are reported in Technical Report No. SP-2284.
3.Action: Running change carried out from 1998 mid-June production.
2/3
Ref.
Model name Version P/G No.
No.
SF-2022 SF-2027 SF-2035
SF-2025 SF-2030
SF-2040 SF-1025 SF-2022
SF-2027 SF-2035
1
SF-2025 SF-2030
SF-2040 SF-1025 SF-2022
SF-2027 SF-2035
SF-2025 SF-2030
SF-2040 SF-1025 SF-2022
SF-2027 SF-2035
SF-2025 SF-2030
SF-2040 SF-1025
2
SF-2022 SF-2027 SF-2035
SF-2025 SF-2030
SF-2040 SF-1025
SF-DM11
(SF-2025 SF-2030)
SF-DM11
3
(SF-2040) SF-DM11
(SF-2022 SF-2027)
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type. New type cannot be used in place of current type.
3. Current type cannot be used in place of new type. New type can be used in place of current type.
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
7 -5
8 -5
7 -5
7 -7
8 -7
7 -7
7 -2
8 -2
All
7 -2
26 -33
27 -33
26 -33
26
27
26
41 -86
42 -86
43 -86
Current parts New parts
Parts code Parts code
LPLTM4033FCZZ LPLTM4033FCZ1 AD
XBPSD30P14000 XHBSD30P14000
XBBSD40P10000 XHBSE40P10000 Screw (M4×10)
PGIDM1825FCZZ PGIDM1825FCZ1 AN Lower guide
LSTPP0279FCZZ
MARMP0149FCZZ MARMP0149FCZ1 AD Roller arm ADU 1 1
Discontinued in one
location
Price
5. Interchangeable if replaced with same types of related parts in use.
6. Others.
Parts name
rank
Guide switch fixing plate
Screw (M3×14) Q'ty:2
AA
---- Stopper 6
1: Running change from 1998 mid-June production. 2: Changed in 1 location only.
Effec-
tive
time
1
1st lot
'98/6
Inter-
change-
ability
5
1
Note
2
3/3
Loading...