SHARP sp2287 Technical Report

COPIER(OPTION) : SF-S56

Date

Jun. 16, 1998

No. : SP-2287

MEASURE TO IMPROVE THE INTERFACING PERFORMANCE DURING STAPLE OPERATIONS.

1.Model Name: SF-S56

2.General: The addition of a plate has been carried out to the stapler. This action has been carried

out as a measure to improve the interfacing performance during staple operations. (Please refer to the figure shown below for details concerning the action described above.)

M3 × 6 B-tight screws

Scooping plate (the shaded section)

3.Action: From the 1st lot of 1998 March production.

Ref.

Model

No.

SF-S56 All

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

----

SHARP CORPORATION Reprography Division

Effec-

Price

0GZFB46653000 AK Scooping plate 0GZXB47300707 AB Screw (M3 × 6) Q'ty: 2

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Parts name

rank

tive

time

1st lot

'98/3

Inter-

change-

ability

Note

Green