SHARP sp2280 Technical Report

COPIER(OPTION) : SF-S56

Date

May. 15, 1998

No. : SP-2280

MEASURE TO ALLEVIATE PROBLEMS OF THE TIMING BELT BECOMING DISENGAGED.

1.Model Name: SF-S56

2.General: The addition of a pulley flange has been carried out, and a change has been carried out

in the position of the holes for the motor fixing screws of the DC motor bracket. This action has been carried out as a measure to alleviate problems of the bin shift timing belt becoming disengaged.

Bin shift motor

Added pulley flange

DC motor bracket 0GZ4A12392000 → 0GZ4A12392010 Pulley flange ---- → 0GZ4A14123000

Note: When carrying out the action described above, caution should be exercised

to replace the DC motor bracket whenever the addition of the pulley flange to the machines is carried out.

44T pulley

Changed DC motor bracket

3.Action: From the start of 1998 February production.

SHARP CORPORATION Reprography Division

1/2

Green

Ref.

Model

No.

SF-S56 All

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

name

Version P/G No.

3 -39 3

Current parts New parts

Parts code Parts code

0GZ4A12392000 0GZ4A12392010 AL DC motor bracket

---- 0GZ4A14123000 AG Pulley flange 6

Price

rank

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Parts name

Effec-

tive

time

1st lot

'98/2

Inter-

change-

ability

Note

2/2