SHARP sp2278 Technical Report

COPIER : SF-2050
Date
:
May. 15, 1998
No. : SP-2278
MEASURE TO IMPROVE THE SEPARATING PERFORMANCE OF THE COPY PAPER IN THE FUSING UNIT.
1.Model Name: SF-2050
2.General: A change has been carried out in the upper heat roller and the upper CL roller unit.
This action has been carried out as a measure to improve the separating performance of the copy paper as it passes through the heat roller.
<Part name> <Old> <New>
Upper heat roller NROLT1074FCZ1 NROLT1074FCZ2 Upper CL roller unit CROLN1076FC31 CROLN1076FC32
3.Action: From the start of 1998 March production.
Ref.
Model
No.
SF-2050 All
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
name
16 -40
16 -101 CROLN1076FC31 CROLN1076FC32 BK Upper CL roller unit
New type cannot be used in place of current type.
New type can be used in place of current type.
Current parts New parts
Parts code Parts code
NROLT1074FCZ1 NROLT1074FCZ2 BQ Upper heat roller
Effec-
Price
rank
5. Interchangeable if replaced with same types of related parts in use.
6. Others.
Parts name
tive
time
1st lot
'98/3
Inter-
change-
ability
1
Note
SHARP CORPORATION Reprography Division
Green
C
Loading...