SHARP sp2277 Technical Report

COPIER : SF-2050
Date
:
May. 15, 1998
1. MEASURE TO ESTABLISH EXCHANGEABILITY OF PARTS IN THE TC CASE UNIT.
2. MEASURE TO ESTABLISH EXCHANGEABILITY OF PARTS IN THE LEFT EXTERIOR UPPER.
No. : SP-2277
1. Measure to establish exchangeability of parts in the TC case unit.
1.Model Name: SF-2050
2.General: The changes described below have been carried out in the TC guide unit and the TC
case unit. This action has been carried out as a measure to establish exchangeability of parts with other models.
3.Action: From the start of 1997 October production.
2. Measure to establish exchangeability of parts in the left exterior upper.
1.Model Name: SF-2050
2.General: The changes described below have been carried out in the left exterior upper. This
action has been carried out as a measure to establish exchangeability of parts with other models.
<Part name> <Old> <New>
Left exterior upper GCAB-0829FCZZ GCAB-0829FCZ1
3.Action: From the start of 1998 March production.
SHARP CORPORATION Reprography Division
1/2
Green
C
Ref.
No.
Model
name
Version P/G No.
Current parts New parts
Parts code Parts code
Price
rank
Parts name
Effec-
tive
time
Inter-
change-
ability
Note
1
SF-2050 All
2
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type. New type cannot be used in place of current type.
3. Current type cannot be used in place of new type. New type can be used in place of current type.
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
42 -1 CGIDH1570FC51 CGIDH1570FC52 AP TC guide unit
42 -901
1 -24
CCASZ0273FC51 CCASZ0273FC52 BC TC case unit
GCAB-0829FCZZ GCAB-0829FCZ1 BA Left exterior upper
5. Interchangeable if replaced with same types of related parts in use.
6. Others.
1st lot '97/10
1st lot
'98/3
1
2/2
Loading...