SHARP sp2275 Technical Report

COPIER : SF-2020/2120

Date

May. 15, 1998

No. : SP-2275

CHANGE CARRIED OUT IN THE OPERATING PANEL.

1.Model Name: SF-1020/2020/11 20/2120

2.General: A change has been carried out in the operating panel. The size mark of the operating

panel has been changed from a printed mark to a stamped marking (please refer to the figure shown below). This action has been carried out as a measure to improve productivity. In accordance with this change a change has also been carried out in the part code.

3.Action: Japanese domestic production: From the start of 1998 March production.

∗

Chinese (SOCC) production: From the start of 1998 April production. French (SMF) production: From the start of 1998 May production.

Ref.

Model

No.

SF-2020 SF-2120

SF-1020 SF-1120

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

2 -3

All

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

CPNLC0236FC01 CPNLC0236FC02 CPNLC0236FC03 CPNLC0236FC02 CPNLC0236FC03

HPNLC0236FCZ1 AW Operation panel ∗ 1

Price

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Parts name

rank

Effec-

tive

time

Inter-

change-

ability

Note

SHARP CORPORATION Reprography Division

Green