Date: Mar. 20, 1998
COPIER SF-2050/2052
1.
Change of parts in the transport support plate unit
2.
Material change of rear cabinet
3.
Improvement of detection accuracy of front cover switch
1. Change of parts in the transport support plate unit
1. Model Name: SF-2050/2052
2. General: In order to improve the productivity, the manufacturer of following parts is changed. Therefore,
No. : SP-2260
the parts codes are also changed.
1 <Parts name>
Suction driven shaft
Suction drive shaft
Suction lift shaft
3. Action: From the 1st unit of production in February, 1998
2. Material change of rear cabinet
1. Model Name: SF-2050/2052/2150
2. General: In order to improve the productivity, the material of rear cabinet is changed. Therefore, the parts
codes are also changed.
<Parts name>
NSFTZ2140FCZZ →
NSFTZ2138FCZZ →
NSFTZ2139FCZ1 →
<Old>
NSFTZ2140FCZ1
NSFTZ2138FCZ1
NSFTZ2139FCZ2
<Old>
<New>
<New>
Rear cabinet (for SF-2050)
Rear cabinet (for SF-2052/2150)
3. Action: From the production in February, 1998 (running change)
GCAB-0831FCZZ →
GCAB-0831FCZ1 →
SHARP CORPORATION Reprography Division
GCAB-0831FCZ3
GCAB-0831FCZ4
1/2
Green
C
3. Improvement of detection accuracy of front cover switch
1. Model Name: SF-2050/2052/2150
2. General: In order to improve the detection accuracy of front cover switch, the MG catch Mylars are added
between the front cabinet R reinforcing plate and front cabinet LMG plate.
<Parts name> <Parts code>
MG catch Mylar PSHEP4577FCZZ
3. Action:
SD-2050 → From the production in October, 1997
SD-2052/2150 → From the 1st unit of mass production
Ref.
Model
No.
name
SF-2050
SF-2052
SF-2050
1
SF-2052
2150
SF-2050
SF-2052
2150
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones
for maintaining the safety and performance of the set.
Version P/G No.
26 - 7 NSFTZ2140FCZZ NSFTZ2140FCZ1 AL Suction shaft
26 -11 NSFTZ2138FCZZ NSFTZ2138FCZ1 AP Suction drive shaft
26 -24 NSFTZ2139FCZ1 NSFTZ2139FCZ2 AQ Suction lift shaft
ALL
1 - 27
2 - PSHEP4577FCZZ AC MG catch Mylar
Current parts New parts
Parts code Parts code
GCAB-0831FCZZ GCAB-0831FCZ3
GCAB-0831FCZ1 GCAB-0831FCZ4
5. Interchangeable if replaced with same types of related
parts in use.
6. Others.
Parts name
Price
rank
BD Rear exterior
Effec-
tive
time
1st lot
’98/2
Mid-
’98/2
1st lot
’97/10
1st lot
Inter-
change-
ability
1
6
Note
2/2