SHARP sp2248 Technical Report

COPIER : SF-2040 etc.
Date
:
Mar. 5, 1998
1.CHANGE CARRIED OUT IN THE PARTS USED IN THE TRAY DRAWER UNIT.
2.CHANGE CARRIED OUT IN THE PARTS USED IN THE TRAY ASSEMBLY DRAWER UNIT.
3.CHANGE CARRIED OUT IN THE PARTS USED IN THE ADU UNIT.
No. : SP-2248
1. Change carried out in the parts used in the tray drawer unit.
1.Model Name: SF-2022/2025/2027/2030/2035/2040
2.General: The bit insert of the tray handle attachment section has been discontinued, and the part
is now attached by a binding screw fixing method. This action has been carried out as a measure to improve productivity.
4.Action: From 1997 mid-December production.
Old parts are interchangeable only with old parts, and new parts are interchangeable
ability:
only with new parts.
<Part name> <Old> <New> Drawer case GCASP0155FCZZ GCASP0155FCZ1 Tray handle JHNDP0107FCZZ JHNDP0107FCZ1 Screw XBTSE40P08000 XEBSE40P10000
SHARP CORPORATION Reprography Division
1/4
Green
C
2. Change carried out in the parts used in the tray assembly drawer unit.
p3/4
1.Model Name: SF-1025/2022/2025/2027/2030/2035/2040/2050/2052/2150/D20/CM11
2.General: The bit insert of the tray handle attachment section has been discontinued, and the part
is now attached by a binding screw fixing method. This action has been carried out as a measure to improve productivity.
ability:
Old parts are interchangeable only with old parts, and new parts are interchangeable only with new parts.
<Part name> <Old> <New> Tray drawer case GCASP0156FCZZ GCASP0156FCZ1 Tray handle JHNDP0107FCZZ JHNDP0107FCZ1 Screw XBTSE40P08000 XEBSE40P10000
4.Action: From 1997 mid-December production.
3. Change carried out in the parts used in the ADU unit.
1.Model Name: SF-DM11
2.General: The bit insert of the tray handle section has been discontinued, and the part is now
attached by a binding screw fixing method. This action has been carried out as a measure to improve productivity.
XBTSC40P08000
XEBSE4
2/4
Loading...
+ 2 hidden pages