SHARP sp2244 Technical Report
Date: Feb. 17, 1998
COPIER: SF-2050/2052
Change of parts in the curl correcting unit
1. Model Name: SF-2050/2052/2150
2. General: Since 1st mass-produced product of SF-2052/2150, the following parts have been changed and
added. Therefore, correct the parts guide.On SF-2050 which commonly uses the unit, the similar
No. : SP-2244
change is applied.
3. Action:
SHARP CORPORATION Reprography Division
SF-2052/2150 → 1 mass-produced product
SF-2050 (Production in Japan) → 1st product in October, 1997
SF-2050 (SMF production) → 1st product in November, 1997
1/2
Green
C
Ref.
Model
No.
name
SF-2052
SF-2050
SF-2052
SF-2050 *
SF-2052
SF-2050 *
SF-2052
SF-2050 * 1
SF-2052
SF-2052
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
New type cannot be used in place of current type.
3. Current type cannot be used in place of new type.
New type can be used in place of current type.
Parts marked with " " is important for maintaining the safety of the set. Be sure to replace these parts with specified ones
for maintaining the safety and performance of the set.
Version P/G No.
2150
2150
2150
2150
2150
2150
27 -26
All
27
Current parts
Parts code
PGIDH1618FCZ2
- PSHEP4585FCZZ AC
DUNT-6759FCZZ
DUNT-6759FC11
New parts
Parts code
PGIDH1618FCZ3 AP
PSHEP4581FCZZ
DUNT-6759FC12
DUNT-6759FC13
5. Interchangeable if replaced with same types of related
6. Others.
Price
rank
parts in use.
Turn over paper
guide upper
Curl correcting
AG
PG sheet
Knockout sheet,
rear end
Curl correcting
BT
unit
(AB system)
Curl correcting
BS
unit (inch
system)
Parts name
Effec-
tive
time
1st lot 3
* 1
1st lot
1st lot
1st lot 3
1st lot 3
* 1
Inter-
change-
ability
6
Note
2/2
Loading...