SHARP sp2231 Technical Report
COPIER : SF-2118/2120
Date
:
Jan. 19, 1998
1. CHANGE CARRIED OUT IN THE SHAPE OF THE TC TRANSPORT GUIDE.
2. MEASURE TO IMPROVE THE COPY PAPER TRANSPORT PERFORMANCE OF THE
SUCTION SECTION.
3. DISCONTINUANCE OF PARTS IN THE OPTICAL SECTION.
4. MEASURE TO IMPROVE THE HOLDING PERFORMANCE OF THE SIDE FACE COVER.
No. : SP-2231
1. Change carried out in the shape of the TC transport guide.
1.Model Name: SF-2116/2118/2020/2120/1016/1018/1020/1120
2.General: There was a possibility of breaking the TC transport guide due to mistakes made when
detaching it during servicing operations. As a measure to alleviate this problem,
A change has been carried out in the shape of a portion of the TC transport guide.
This action has been carried out as a measure to improve serviceability.
TC Transport guide N
TC Case UN
Extended 5 mm
This portion has been designed to function as a handle.
3.Action: Japanese domestic production: From the 1st lot of 1997 November production.
∗ 1
Chinese (SOCC) production: From the 1st lot of 1997 December production.
French (SMF) production: From the 1st lot of 1998 January production.
2. Measure to improve the copy paper transport performance of the suction section.
1.Model Name: SF-2116/2118/2020/1016/1018/1020
2.General: A change has been carried out in the suction fan. This action has been carried out as a
measure to improve the copy paper transport performance of the suction section.
<Old> <New>
NFANP0044FCZZ → RMOTE0700FCZZ
SHARP CORPORATION Reprography Division
1/4
Green
C
3.Action: Japanese domestic production: From the 1st lot of 1997 November production.
A change has been carried out in the material of the ADF MG plate B8 in the ADU guide L and R sectio
∗ 2
Chinese (SOCC) production: From the 1st lot of 1997 December production.
French (SMF) production: From the 1st lot of 1998 January production.
3. Discontinuance of parts in the optical section.
1.Model Name: SF-2116/2118/2020/2120/1016/1018/1020/1120
2.General: The parts shown below in the 4th and 5th mirror holder unit, and in the lens drive unit
have been discontinued. This action has been carried out as a measure to improve
productivity.
• Lens shield sheet 2 PSHEZ4390FCZZ (Qty: 2)
• 4th mirror sheet PSHEP4007FCZZ (Qty: 1)
• 5th mirror sheet PSHEP4008FCZZ (Qty: 1)
• 4th and 5th mirror sheet PSHEZ4009FCZZ (Qty: 1)
3.Action: From the 1st lot of 1997 November production.
4. Measure to improve the holding performance of the side face cover.
1.Model Name: SF-2120/1120
2.General:
LPLTM2573FCZ1 → LPLTM2573FCZ2
<Old> <New>
3.Action: Japanese domestic production: From the 1st lot of 1997 November production.
Chinese (SOCC) production: From the 1st lot of 1997 December production.
∗ 3
French (SMF) production: From the 1st lot of 1998 January production.
2/4
Loading...