SHARP sp2230 Technical Report

COPIER(OPTION) : SF-DS15/A55

Date

:

Jan. 19, 1998

No. : SP-2230

1. ESTABLISHMENT AS SERVICE PARTS THE PARTS WHICH ARE
INCLUDED IN THE BOXES WITH THE DESKS.

2. MEASURE TO ALLEVIATE PROBLEMS OF THE CLAWS OF THE
RETAINER HOLDER BECOMING CAUGHT.

1. Establishment as service parts the parts which are included in the boxes with the
desks.

1.Model Name: SF-DS15/DS16/DS17/DS18

2.General: The parts listed below, which are included in the boxes with each of the desks, have

been established as service parts.

SF-DS15

Castor

Castor fixing screw

SF-DS16

Shelf plate
(secured with 3 screws on the inside of the desk)

Adjusting screw

Joint screw

Castors
(with stoppers)

Castors
(without stopper)

Shelf plate supports

Shelf plate guide plate Shelf plate guide

plate fixing screws

Castor fixing screws

Position control screws

SHARP CORPORATION Reprography Division

Joint screw A
(short)

Joint screw B
(long)

1/3

Green

C

SF-DS17/DS18

Castors

Joint plate

Castors (stoppers)

Joint screws

Castor fixing screws

2. Measure to alleviate problems of the claws of the retainer holder becoming caught.

1.Model Name: SF-A54/A55

2.General: There was a possibility of the heads of the attachment screws of the DF spacer (P/G

[4]-35) becoming caught on the claws of the retainer holder during copy operations
carried out on exceptionally thick original documents, such as books, etc. This is due to
the bending of the retainer holder. As a measure to alleviate this problem, a change has
been carried out in the heads of the attachment screws, and flathead type screws are
now used.

3.Action: ∗ Running change from 1997 mid-March production.

2/3