SHARP sp2224 Technical Report

COPIER : SF-2116/2120
Date
:
Jan. 12, 1998
1. MEASURE TO PREVENT CONTACT BETWEEN THE MAGNETIC SPRING CLUTCH AND THE BASE PLATE.
2. MEASURE TO ESTABLISH INTERCHANGEABILITY OF THE AC CORD.
3. MEASURE TO IMPROVE THE PERFORMANCE OF THE WASTE TONER PIPE SLIDE.
No. : SP-2224
1. Measure to prevent contact between the magnetic spring clutch and the base plate.
1.Model Name: SF-2120/1120
2.General: There have been problems of the magnetic spring clutch (P/G [18]-14) coming in contact
[Old]
Moved 1.3 mm Moved 2.7 mm
[New]
3.Action: Japanese domestic production: From the 1st lot of 1997 January production.
French (SMF) production: From the 1st lot of 1997 March production.
2. Measure to establish interchangeability of the AC cord.
1.Model Name: SF-2116/2118/1016/1018/2020/2120/1020/1120
(UK, Cyprus, Malaysia, Bahrain state of, Kuwait, North Yemen, Saudi Arabia)
2.General: The plug and the cord of the machines bound for the destinations listed above were
previously established as separate parts, but have now been reestablished as a single part. This action has been carried out as a measure to improve serviceability.
Plug QPLGA0005QCZZ
QACCE7422QCZZ
AC Cord QCNW-0001QCZZ
SHARP CORPORATION Reprography Division
1/2
Green
C
3. Measure to improve the performance of the waste toner pipe slide.
1.Model Name: SF-2116/2118/1016/1018
2.General: The sliding performance of the waste toner pipe during replacement operations of the
waste toner bottle was poor due to the width of the pipe sheet being too large. As a measure to alleviate this problem, a change has been carried out in the dimensions of the pipe sheet.
Change size A from 20 to 7
3.Action: From 1995 mid-March production.
Ref.
Model
name
Version P/G No.
New type cannot be used in place of current type.
New type can be used in place of current type.
All 18 -46 NROLR1170FCZZ NROLR1170FCZ1 AR U-turn transport roller 3
20 -14
21 -14
All 14 -69 PSHEZ3899FCZZ PSHEZ3899FCZ1 AC Pipe sheet
No.
SF-2120
1
SF-1120 SF-2116
SF-2118 SF-1016 SF-1018
2
SF-2020 SF-2120 SF-1020 SF-1120
SF-2116 SF-2118
3
SF-1016 SF-1018
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with ‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Current parts New parts
Parts code Parts code
---- QACCE7422QCZZ BB AC cord ---- 6
Price
rank
5. Interchangeable if replaced with same types of related parts in use.
6. Others.
Parts name
Effec-
tive
time
Mid-
’95/3
Inter-
change-
ability
3
Note
2/2
Loading...