SHARP sp2223 Technical Report

COPIER : SF-2116/2120

Date

:

Jan. 19, 1998

1. ESTABLISHMENT OF A SPECIAL REAR EDGE PLATE TO ACCOMMODATE 8 1/2 × 13 INCH SIZE COPY

PAPER.

2. MEASURE TO ALLEVIATE PROBLEMS OF PAPER JAMS IN THE MANUAL MULTI PAPER FEEDING UNIT
DURING PAPER FEEDING OPERATIONS.

3. MEASURE TO PREVENT PROBLEMS OF DISLOCATION OF THE OZONE FILTER.

4. MEASURE TO PREVENT PROBLEMS OF DISTORTION OF THE DELIVERY PAPER PLATE SPRING.

1. Establishment of a special rear edge plate to accommodate 8 1/2 × 13 inch size

copy paper.

No. : SP-2223

1.Model Name: SF-2116/2118 (Australia, SRH)

∗

SF-1016/1018 Pakistan, the Philippines, Indonesia, Brazil, Saudi Arabia, Greece,

Lebanon, Iran, Iraq, Nigeria, Turkey, Bangladesh, India, STCL,
Egypt, Jordan, Syria, South Africa, Sri Lanka,
Special country, North Yemen, Cyprus,
Malaysia, SRS, Oman, Qatar, UAE, Bahrain, Kuwait

2.General: As a measure to accommodate 8 1/2 × 13 inch size copy paper (full skap) a special

rear edge plate has been newly established and included in the boxes.

3.Action: From the 1st lot of 1996 October production.

SHARP CORPORATION Reprography Division

1/3

Green

C

2. Measure to alleviate problems of paper jams in the manual multi paper feeding unit
during paper feeding operations.

1.Model Name: SF-MF15

2.General: There have been problems of paper jams occurring during copy paper feeding

operations caused by a problem in the setting method of the copy paper. The front edge
of the copy paper was getting caught on the manual sheet, and was not being set far
enough to the rear of the tray. As a measure to alleviate this problem, the addition of a
multi guide mylar sheet to the front of the manual sheet has been carried out.

Multi guide mylar

3.Action: From the 1st lot of 1996 August production.

3. Measure to prevent problems of dislocation of the ozone filter.

1.Model Name: SF-2120, SF-1120

2.General: The addition of a filter retainer mylar FD has been carried out. This action has been

carried out as a measure to prevent problems of the filter dislocation from occurring
after the ozone filter has been installed in the optical unit.

Filter retainer mylar FD

(Standard)

(Standard)

3.Action: From the 1st lot of 1996 November production.

2/3