SHARP sp2216 Technical Report

COPIER(OPTION) : SF-CM15/CM16

Date

Dec. 26, 1997

No. : SP-2216

ADDITION OF A PROTECTIVE MOLT CARRIED OUT TO THE DOUBLE-BASE PLATE REINFORCEMENT PLATE.

1.Model Name: SF-CM15/CM16

2.General: The addition of a protective molt has been carried out to the double-base plate

reinforcement plate. This action has been carried out as a measure to improve safety performance during installment operations, etc.

The attachment of the protective molt is carried out on the double-base plate reinforcement plate.

Attachment standard for the protective molt.

Double-base plate reinforcement plate. Back side diagram

Protective molt

Side view

3.Action: From 1997 mid-September production.

SHARP CORPORATION Reprography Division

Standard

1/2

Green

Ref.

No.

Model

name

Version P/G No.

Current parts New parts

Parts code Parts code

Price

rank

Parts name

Effec-

tive

time

Inter-

change-

ability

Note

SF-CM15

SF-CM16

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

All

---- PMLT-1153FCZZ AC Protective molt

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Mid-

’97/9

2/2