COPIER : SF-2118/2120
No. : SP-2215
ADDITION OF A PROTECTIVE MOLT CARRIED OUT TO
THE DOUBLE-BASE PLATE REINFORCEMENT PLATE.
1.Model Name: SF-2116/1016/2118/1018/2020/1020/2120/1120
2.General: The addition of a protective molt has been carried out to the double-base plate
reinforcement plate. This action has been carried out as a measure to improve safety
performance during installment operations, etc.
The attachment of
the protective molt is
carried out on the
double-base plate
reinforcement plate.
Attachment standard for
the protective molt.
Double-base plate
reinforcement plate.
Back side diagram
Protective molt
Side view
3.Action: From 1997 mid-September production.
SHARP CORPORATION Reprography Division
Standard
1/2
Green
C
Ref.
Model
No.
SF-2116
SF-2118
SF-1016
SF-1018
SF-2118
SF-1018
SF-2020
SF-2120
SF-1020
SF-1120
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
name
19
All
22
20
32
New type cannot be used in place of current type.
New type can be used in place of current type.
Current parts New parts
Parts code Parts code
---- PMLT-1153FCZZ AC Protective molt
Price
rank
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
Parts name
Effec-
tive
time
Mid-
’97/9
Inter-
change-
ability
6
Note
2/2