SHARP sp2213 Technical Report

COPIER(OPTION) : SF-C52

Date

Dec. 17, 1997

No. : SP-2213

MEASURE TO ALLEVIATE PROBLEMS OF DOUBLE FEEDING.

1.Model Name: SF-C52/C52N

2.General: A change has been carried out in the limiter value of the limiter unit. The previous limiter

value of 325 ± 25 g has been changed to 360 ± 25 g. In addition to this change, a change has been carried out in the color of the plastic to distinguish between the old parts and the new ones. The white color of the old parts has been changed to black. This action has been carried out as a measure to alleviate problems of double feeding.

Color of the plastic (white → black)

3.Action: From the 1st lot of 1997 October production.

Ref.

Model

No.

SF-C52

SF-C52N

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

All 61 -36 CCLR-0373FC33 CCLR-0373FC35 AT Limiter unit

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

SHARP CORPORATION Reprography Division

Effec-

Price

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Parts name

rank

tive

time

1st lot ’97/10

Inter-

change-

ability

Note

Green