SHARP sp2212 Technical Report

COPIER : SF-2050

Date

Dec. 19, 1997

No. : SP-2212

MEASURE TO ALLEVIATE PROBLEMS OF FOLDED CORNERS AND FUSING WRINKLES DURING BACK SIDE COPY OPERATIONS.

1.Model Name: SF-2050

2.General: There was a possibility of problems of folded corners and fusing wrinkles occurring

during back side copy operations. As a measure to alleviate this problem, a change has been carried out in the shape of the fusing front upper PG.

[Old] [New]

3.Action: From the 1st lot of 1997 October production.

Ref.

Model

No.

SF-2050 All 16 PGIDH1619FCZZ PGIDH1619FCZ1 AH

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

Effec-

Price

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Parts name

rank

Fusing front upper PG

tive

time

1st lot ’97/10

Inter-

change-

ability

3 Q’ty:2

Note

SHARP CORPORATION Reprography Division

Green