SHARP sp2210 Technical Report

COPIER : SF-2050

Date

:

Dec. 26, 1997

No. : SP-2210

CHANGE IN THE PART CODES CARRIED OUT IN ACCORDANCE WITH A
CHANGE THAT WAS CARRIED OUT IN THE MAKER AS AN ACTION TO
IMPROVE PRODUCTIVITY.

1.Model Name: SF-2050

2.General: There was a change that was carried out in the maker of the toner screw which is used

in the cleaner unit, and in accordance with this change a change has also been carried
out in the part code of the toner screw. This action has been carried out as a measure to
improve productivity. It is important to note that both the old and new parts are
interchangeable, and there is no problem in terms of using either one.

3.Action: From the 1st lot of 1996 June production.

Ref.

Model

No.

SF-2050 All

<Interchange>

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

15 -29

34 -10

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

NSRW-0017FCZZ NSRW-0025FCZZ AC Toner screw

Effec-

Price

rank

5. Interchangeable if replaced with same types of
related parts in use.

6. Others.

Parts name

tive

time

1st lot

’96/6

Inter-

change-

ability

1

Note

SHARP CORPORATION Reprography Division

Green

C