COPIER : SF-2118/2120/CM16
Date
:
Dec. 12, 1997
1. MEASURE TO IMPROVE THE HOLDING PERFORMANCE OF THE SIDE FACE COVER.
2. DISCONTINUANCE OF THE COUNTER FIXING PLATE.
3. CHANGE CARRIED OUT IN THE MC GRID IN THE MC UNIT.
4. CHANGE CARRIED OUT IN THE MATERIAL USED IN THE MOTOR PROTECTION SHEET IN
THE DRIVE FRAME UNIT.
No. : SP-2204
1. Measure to improve the holding performance of the side face cover.
1.Model Name: SF-2118/1018/2020/2120/CM16
2.General: A change has been carried out in the magnetic catch used in the transport guide section.
This change has been carried out as a measure to improve the magnetic adhesion
performance of the unit. The action described above has been carried out as a measure
to improve the holding performance of the side face cover.
3.Action: From the start of 1997 October production.
1.Model Name: SF-2116/1016/2118/1018/2020/1020/2120/1120
2.General: The counter fixing plate and the attachment parts have been discontinued. This change
(For Chinese (SOCC) production: From the 1997 mid-September production).
2. Discontinuance of the counter fixing plate.
has been carried out as a measure to improve productivity.
* Please note that these parts will continue to be supplied as service parts.
SHARP CORPORATION Reprography Division
1/4
Green
C
3.Action: From the start of 1997 August production.
3. Change carried out in the MC grid in the MC unit.
1.Model Name: SF-2116/1016/2118/1018/2020/1020/2120/1120
2.General: A change has been carried out in the MC grid in the MC unit. This change has been
carried out as a measure to improve productivity.
(Old) (New)
LPLTZ4069FCZZ → LPLTZ5474FCZZ
3.Action: From the start of 1997 October production.
4. Change carried out in the material used in the motor protection sheet in the drive
frame unit.
1.Model Name: SF-2116/1016/2118/1018/2020/1020/2120/1120
2.General: A change has been carried out in the material used in the motor protection sheet in the
drive frame unit. This change has been carried out as a measure to improve productivity.
(Old) (New)
PSHEG3831FCZZ → PSHEG3831FCZ1
3.Action: *Japanese domestic production: From the start of 1997 October production.
Chinese (SOCC) production: From the start of 1997 November production.
French (SMF) production: From the start of 1997 December production.
2/4
Ref.
No.
1
2
3
Model
name
SF-2118
SF-1018
SF-2116
SF-2118
SF-1016
SF-1018
SF-2116
SF-2118
SF-1016
SF-1018
SF-2116
SF-2118
SF-1016
SF-1018
SF-2116
SF-2118
SF-1016
SF-1018
SF-2020
SF-2120
SF-1020
SF-1120
SF-2020
SF-2120
SF-1020
SF-1120
SF-2020
SF-2120
SF-1020
SF-1120
SF-2020
SF-2120
SF-1020
SF-1120
SF-2116
SF-2118
SF-1016
SF-1018
SF-2020
SF-2120
SF-1020
SF-1120
Version P/G No.
21 -2 PMAGT0072FCZ1 PMAGT0086FCZZ AH Magnet catch
6 -31
6 -26
6
All
7 -31
7 -26
7 -52
7 -53
25 -1
35 -1
Current parts New parts
Parts code Parts code
LPLTM4963FCZZ Discontinued ---- Counter fixing plate
XHPSD40P08000
LBSHC0323FCZZ
XBSSD30P06000 Screw (3 × 6)
LPLTM4963FCZZ Counter fixing plate
XHPSD40P08000
LBSHC0323FCZZ
XBSSD30P06000 Screw (3 × 6)
LPLTZ4069FCZZ LPLTZ5474FCZZ AH Grid
Q’ty changed
(20 → 18)
Discontinued ----
Q’ty changed
(20 → 18)
Discontinued ----
Price
rank
AA Screw (M14 × 8)
AA Screw (M4 × 8)
Parts name
Edge protector
Edge protector
Effec-
tive
time
1st lot
’97/10
1st lot
’97/8
1st lot
’97/10
Inter-
change-
ability
3 Q’ty:2
6
1
Note
3/4
Ref.
Model
No.
SF-2116
SF-2118
SF-1016
SF-1018
4
SF-2020
SF-2120
SF-1020
SF-1120
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
name
18 -14
All
19 -14
New type cannot be used in place of current type.
New type can be used in place of current type.
Current parts New parts
Parts code Parts code
PSHEG3831FCZZ PSHEG3831FCZ1 AF Motor protection sheet * 1
Price
rank
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
Parts name
Effec-
tive
time
Inter-
change-
ability
Note
4/4
Loading...