DUPLICATOR : SF-2050
No. : SP-2202
[Service information]
REGARDING CORRECTIONS TO POSITION ADJUSTMENT
VALUE OF MAIN ELECTRODE FOR DEVELOPER’S MG ROLLER.
1.Model Name: SF-2050
2.General: We have corrected a mistake in the position adjustment value of the main electrode for
the developer’s magnetic roller on page 8-1 of the service manual for the above model.
3.Description: The position adjustment value of the main electrode for the developer’s magnetic roller,
page 8-1 (2) of the SF-2050 service manual No. 1, has been changed as follows:
Note:
For accurate
measurement, insert a
4-mm spacer into both
sides of the developing
bath’s lower section, and
draw the needle straight
across.
Change 17.0 → 18.0mm
Change 17.0 → 18.0mm
SHARP CORPORATION Reprography Division
Green
C