SHARP sp2196 Technical Report

COPIER : SF-9800

Date

Dec. 1, 1997

No. : SP-2196

[Service Information]

ESTABLISHMENT OF SERVICE PARTS FOR MODEL SF-9800.

1.Model Name: SF-9800

2.General: The parts indicated by <1> and <2> in the figure shown below have been established as

service parts for the DC motor section of the model listed above.

3.Description:

<2> Screw (0CW030060FPWP)

Belt

M Pulley - 1

DC Motor

<1> HM Shaft (adapter)

(0CW813200////)

Ref.

Model

No.

SF-9800 All 31 ----

1. Interchangeable. 4. Not interchangeable.

2. Current type can be used in place of new type.

3. Current type cannot be used in place of new type.

Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

Version P/G No.

name

New type cannot be used in place of current type.

New type can be used in place of current type.

Current parts New parts

Parts code Parts code

0CW813200//// AP HM Shaft (adapter)

0CW030060FPWP AA Screw

5. Interchangeable if replaced with same types of related parts in use.

6. Others.

Price

rank

Parts name

Effec-

tive

time

---- 6

Inter-

change-

ability

Note

SHARP CORPORATION Reprography Division

Green