SHARP sp2186 Technical Report

COPIER(OPTION) : SF-S55
Date
:
Dec. 1, 1997
1. CHANGE IN PARTS AND ESTABLISHMENT OF PARTS BOTH CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY.
2. SUBSTITUTION OF PARTS CARRIED OUT TO COMPENSATE FOR A HALT IN PRODUCTION.
No. : SP-2186
1. Change in parts and establishment of parts both carried out as a measure to improve productivity.
1.Model Name: SF-S55
2.General: A change has been carried out in the screws used for the electrical power cord plate of
Changed screws
Added part name and part code
3.Action: From 1997 September production.
2. Substitution of parts carried out to compensate for a halt in production.
1.Model Name: SF-452
2.General: A halt in a portion of production of some of the parts was carried out. To compensate for
this situation, a substitution in parts has been carried out. (Please refer to the parts list for details concerning the changed parts.)
3.Action: Due to the fact that there are no plans for production, this action has been carried out on
service parts only.
SHARP CORPORATION Reprography Division
1/2
Green
C
Ref.
Model
No.
1 SF-S55
2 SF-452
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with ‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
name
4 -10
12 ---- 0GZFB36383000 AF Rake plate
All
10 -5
8 -1
10 -901
New type cannot be used in place of current type.
New type can be used in place of current type.
Current parts New parts
Parts code Parts code
0GZXA90629000 0GZXA90633000 AD Screw (M4 × 8)
0BL06-20492// 0BL062-10407/ AL IC [IC5]
0BL92T-86162/ 0BL92T-86163/ BX SD PWB
Price
5. Interchangeable if replaced with same types of related parts in use.
6. Others.
Parts name
rank
Effec-
tive
time
1st lot
’97/9
----
Inter-
change-
ability
1
----
1
Note
2/2
Loading...