SHARP SP2170 Technical Report

COPIER : SF-S52

Date

:

Aug. 18, 1997

No. : SP-2170

[Service Information]

CORRECTIONS CARRIED OUT IN THE PARTS GUIDE FOR
THE 20-BIN STAPLE SORTER OF MODEL SF-S52.

1.Model Name: SF-S52

2.General: An error was discovered in the parts guide for the model listed above, and has been

corrected.

3.Description: The bin drive assy R (please refer to the diagram shown below) is secured to the

chassis ( 1 - 6 ) by rivets, and as a result it can not be detached from the chassis. It is
therefore impossible for the bin drive assy R to be offered as a single part for supply. For
this reason the diagram listed in the parts guide has been corrected as indicated in the
diagram shown below. Furthermore, the list and the diagram for the bin drive unit of
block 4 has also been corrected.

1 Exterior

The diagram has been
corrected to a diagram which
shows the bin drive assy R
attached to the chassis.

Replacement operations carried out on
the bin drive assy R will consist of
replacing the no. 6 chassis assy
(which has the bin drive assy R
attached to it). Please refer to the bin
drive unit of block 4 in the parts guide
for information concerning the
sub-parts of the bin drive assy R.

SHARP CORPORATION Reprography Division

1/2

Green

C

The bin drive unit and list of block 4 have been further corrected as described below.

901 (Bin drive assy F)

( No.1-17, H1-3 )

2/2

Bin drive assy R