SHARP SP2164 Technical Report

COPIER : SF-2116/2020

Date

:

Aug. 7, 1997

[Service Information]

No. : SP-2164

CHANGES CARRIED OUT AS A MEASURE TO
IMPROVE PRODUCTIVITY.

1.Model Name: SF-2116/2118/1016/1018/2020/2120/1020/1120

2.General: Discontinuance and changes of some of the parts in the models listed above have been

carried out as a measure to improve productivity.

3.Description: (1) The fusing front paper guide spring has been discontinued. (Only one location on the

rear frame side.)
(2) A change has been carried out in the fusing front paper guide adjustment screws.
(3) The fusing front paper guide adjustment screw nuts have been discontinued.

SHARP CORPORATION Reprography Division

1/3

Green

C

(4) Some of the fixing screws used in the lower frame F and R which is attached in the

base plate unit have been discontinued.

Lower frame R

Lower frame F

The arrows marked with an ‘‘ × ’’ in the figure shown above
indicate the discontinued screws (in 5 locations).

(5) The side plate sub sheet used in the 250 tray has been discontinued.

4.Action: From the 1st lot of 1997 July production.

2/3