SHARP SP2160 Technical Report
COPIER : SF-2116/2020
Date
:
Jul. 10, 1997
[Service Information]
No. : SP-2160
ELIMINATION OF PARTS CARRIED OUT AS A
MEASURE TO IMPROVE PRODUCTIVITY.
1.Model Name: SF-2116/2118/1016/1018/2020/2120/1020/1120
2.General: The three types of suction cushions which were attached to the lower frame suction duct
plate have been discontinued. This change has been carried out as a measure to
improve productivity.
3.Action: From 1997 September production.
SHARP CORPORATION Reprography Division
1/2
Green
C
Ref.
Model
No.
SF-2116
SF-2118
SF-1016
SF-1018
SF-2116
SF-2118
SF-1016
SF-1018
SF-2116
SF-2118
SF-1016
SF-1018
SF-2020
SF-2120
SF-1020
SF-1120
SF-2020
SF-2120
SF-1020
SF-1120
SF-2020
SF-2120
SF-1020
SF-1120
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
name
19 -66 PMLT-0996FCZZ
19 -65 PMLT-0997FCZZ Suction cushion C
19 -64 PMLT-0998FCZZ Suction cushion D
All
20 -66 PMLT-0996FCZZ Suction cushion B
20 -65 PMLT-0997FCZZ Suction cushion C
20 -64 PMLT-0998FCZZ Suction cushion D
New type cannot be used in place of current type.
New type can be used in place of current type.
Current parts New parts
Parts code Parts code
Discontinued ----
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
Price
rank
Suction cushion B
Parts name
Effec-
tive
time
1st lot
’97/9
Inter-
change-
ability
6
Note
2/2
Loading...