Date: Jun. 5, 1997
COPIER(OPTION) : SF-D23
1. ADDITION OF A ø3 HOLE IN THE LCC CASSETTE CARRIED OUT IN ACCORDANCE WITH A REQUEST
BY TH E M A KER.
2. CHANGE IN THE COLOR OF THE CONNECTOR CARRIED OUT IN ACCORDANCE WITH A HALT IN
PRODUCTION.
3. REGISTRATION OF BINDING CLAMP CARRIED OUT AS A MEASURE TO IMPROVE PRODUCTIVITY.
4. MEASURE TO ALLEVIATE PROBLEMS OF CONTACT MISSES OF THE OPENING AND CLOSING SWITCH
OF THE COPY PAPER FEEDING COVER.
No. : SP-2137
1. Addition of a ø3 hole in the LCC cassette carried out in accordance with a request
by the maker.
1.Model Name: SF-D23
2.General: The addition of a ø3 hole has been carried out in the LCC cassette. This change has
been carried out in accordance with a request by the maker.
Note: The hole has been added in a location which is not visible without disassembly.
Furthermore, there has absolutely no problem with performance dropping off as a
result of this change.
3.Action: From 1997 April production.
2. Change in the color of the connector carried out in accordance with a halt in
production.
1.Model Name: SF-A11/A51
2.General: A halt in the production of the AMP manufactured 6-172677-6 (white) interface harness
connecting the copier machine and the ADF which was specified by this company has
occurred, and in accordance with this change in conditions the interface harness has
been changed to 172677-6 (black).
3.Action: From 1997 March production.
SHARP CORPORATION Reprography Division
1/4
Green
C
3. Registration of binding clamp carried out as a measure to improve productivity.
1.Model Name: SF-2040
2.General: 1) The snap band shown in figure 1-11 has been changed to a binding band. This
change has been carried out as a measure to improve productivity.
2) The bushing shown in figure 2 was not registered, and in accordance with this
registration has been carried out.
Figure 1
Figure 2
3.Action: From 1997 April production.
2/4