SHARP SP2135 Technical Report
DIGITAL COPIER : SF-2040
Date
:
Jun. 13, 1997
1. MEASURE TO ALLEVIATE PROBLEMS OF CONTACT WITH THE PAPER
DELIVERY COMMUNICATION GEAR.
2. CHANGE IN THE BEARING OF THE CASSETTE RAIL CARRIED OUT AS A
MEASURE TO IMPROVE PRODUCTIVITY.
No. : SP-2135
1. Measure to alleviate problems of contact with the paper delivery communication
gear.
1.Model Name: SF-2025/2030/2040
2.General: There was a danger in the fusing unit of contact between the paper delivery
communication gear and the attachment screws of the fusing bearing retainer, due to
variance in the length of the attachment screws. As a measure to alleviate this problem,
a change has been carried out in the fusing drive boss A attached to the paper delivery
communication gear, which is inside the lamp holder AS, in order to maintain a proper
space.
3.Action: From 1997 April production.
Lamp holder AS
CHLDZ1292FC01
↓
CHLDZ1292FC02
Fusing drive boss A
SHARP CORPORATION Reprography Division
1/2
Green
C
2. Change in the bearing of the cassette rail carried out as a measure to improve
productivity.
1.Model Name: SF-2022/2122/2027/2127/1025/2025/2030/2035/2040/2050
2.General: A change has been carried out in the maker of the cassette rail caulked bearing of the
cassette rail L/R in the cassette unit. This change has been carried out as a measure to
improve productivity.
3.Action: From 1997 April production.
Ref.
Model
No.
name
SF-2025
SF-2030
1
SF-2040 All 18 -61
SF-2022
SF-2122
SF-2027
SF-2127
SF-1025
SF-2035
SF-2040
SF-2025
SF-2030
2
SF-2050 42 -27
SF-2022
SF-2122
SF-2027
SF-2127
Version P/G No.
Overseas
Overseas
All
Overseas
19 -61
29 -27
39 -27
52 -27
29 -27
28 -16
29 -27
29 -16
30 -27
29 -7
39 -7
52 -7
Current parts New parts
Parts code Parts code
CHLDZ1292FC01 CHLDZ1292FC02 AR Lamp holder AS
CRALM0110FC01 CRALM0110FC02
Price
Parts name
rank
Cassette rail R
AP
Effec-
tive
time
1st lot
’97/4
Inter-
change-
ability
3
1
Note
2/2
SF-1025
SF-2035
SF-2040
SF-2025
SF-2030
SF-2050
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Overseas
New type cannot be used in place of current type.
New type can be used in place of current type.
29 -7
All
28 -7
29 -7
29 -7
30 -7
47 -7
CRALM0111FC01 CRALM0111FC02 Cassette rail L
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
Loading...