SHARP SP2123 Technical Report

Date: May. 12, 1997

COPIER(OPTION) : SF-452

No. : SP-2123

CONCERNING VARIATION S IN THE PI PWB SLIT BOARD GAP.

1.Model Name: SF-452

2.General: In the above models, the gap between the PI PWB and slit board often failed to match

the standard measurement. This caused problems since the unit could not be adjusted. In order to prevent this problem, we have changed the shape of the PI PWB sensor bracket (divided it into two) to make adjustment possible.

(XBPSD30P06KS0) M3 × 6

Bracket

Sensor bracket

PI PWB

Slit board

3.Action: From December, 1989 production on.

Ref.

Model

No.

1 SF-452 All

1. Interchangeable. 4. Not interchangeable.

2. C urr e nt t y pe c a n be u s ed i n p lac e of n ew type . New ty pe cann ot be us ed i n place of curr ent type .

3. C urre nt ty pe cann ot be used i n place of new ty pe. New t y pe c a n be u sed in p lac e of c u r ren t ty p e.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

name

Version P/G No.

6-4

Current parts New parts

Parts code Parts code

0BL2T-32060// 0BL2T-32062// AN Sensor bracket

—

— XBPSD30P06KS0 AA Screw

Standard gap

New

0BL2T-32070//

Effec-

Price

5. Interchangeable if replaced with same types of relate d parts in use .

6. Others.

Parts name

rank

AL Bracket

tive

time

1st lot ’89/12

Inter-

change-

ability

Note

SHARP CORPORATION Reprography Division

Green