SHARP SP2118 Technical Report

Date: Mar. 4, 1997

COPIER : SF-2014

No. : SP-2118

MEASURE TO IMPROVE ADJUSTMENT OPERATIONS FOR THE 4/5 MIRROR HOLDER UNIT.

1.Model Name: SF-2014/Z-800

2.General: Position adjustment operations were difficult to carry out for the 4/5 mirror holder units

in the models listed above. As a measure to alleviate this problem, a change has been carried out in the length of the adjustment screw. The length of the adjustment screws has been changed from 40 mm to 45 mm, making it easier to carry out position adjustment operations.

3.Description: (Old) XBPSD40P40XSO

↓

(New) XBPSD40P45KSO

4.Action: Sanesu production: From 1997 January production. SOCC production: From 1996 mid-June production. SMF production: From 1996 mid-June production.

Ref.

Model

No.

SF-2014

Z-800

1. Interchangeable. 4. Not interchangeable.

2. C urr e nt t y pe c a n be u s ed i n p lac e of n ew type . New ty pe cann ot be us ed i n place of curr ent type .

3. C urre nt ty pe cann ot be used i n place of new ty pe. New t y pe c a n be u sed in p la ce of cu r ren t ty p e.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

name

Version P/G No.

3 -38

All

7 -38

Current parts New parts

Parts code Parts code

XBPSD40P40XSO XBPSD40P45KSO

5. Interchangeable if replaced with same types of relate d parts in use .

6. Others.

Price

rank

Adjustment screw for 4/5 UN

Parts name

Effec-

tive

time

Mid-

’96/6

Inter-

change-

ability

—

Note

SHARP CORPORATION Reprography Division

Green