Date: Apr. 9, 1997
COPIER : SF-2025
No. : SP-2100
1.MEASURE TO ESTABLISH UNIFORMITY OF PARTS IN THE
TRANSPORT BASE PLATE UNI T.
2.CHANGE IN THE SHAPE OF THE PA PER GUI DE CARRIED OUT AS A
MEASURE TO IMP ROVE PRODUCTIVI TY.
1. Measure to establish uniformity of parts in the transport base plate unit.
1.Model Name: SF-1025/2022/2027/2035
2.General: Some of the parts in the transport base plate unit have been made interchangeable for
the SF-2025/2030/2040 models. This action has been carried out as a measure to
improve productivity.
3.Description:
Old New
Suction lift plate spring CSPRP1932FC01 MSPRP2377FCZZ
PS Roller upper NROLP0898FCZ1 NROLP1117FCZZ
PS Roller lower NROLR0899FCZ1 NROLR1118FCZZ
Washer LX-WZ0052FCZZ LX-WZ0117FCZZ
PPD2 Actuator MLEVP0600FCZZ MLEVP0698FCZZ
PS Clutch PCLC-0204FCZZ PCLC-0242FCZZ
4.Action: From 1996 mid-December production.
Figur e 1-24
Figure 1-61
Figure 1-58
Figur e 1-82
Figure 1-54
Figure 1-53
SHARP CORPORATION Reprography Division
1/4
Green
C
2/4
Figure 1
2. Change in the shape of the paper guide carried out as a measure to improve
productivity.
1.Model Name: SF-2025/2030/2040
2.General: A change has been carried out in the shape of the manual PG upper (the hole has been
discontinued). As a result of this change, the mylar sheet which had been attached to
the manual paper feeding unit to prevent folded corners has been discontinued. This
action has been carried out as a measure to improve productivity. In cases whereby
paper guides of the original shape (before the change in shape was carried out) is
used, the mylar sheet described below is necessary.
3.Description: Folded corner prevention mylar sheet
PSHEP4085FCZZ → Discontinued (please refer to figure 2 [61])
4.Action: From 1996 mid-December production.
Figure 2
Discontinued hole and bend
3/4
Ref.
No.
1
2
Model
name
SF-1025
SF-2035
SF-2018
SF-2022
SF-2027
SF-1025
SF-2035
SF-2018
SF-2022
SF-2027
SF-1025
SF-2035
SF-2018
SF-2022
SF-2027
SF-1025
SF-2035
SF-2018
SF-2022
SF-2027
SF-1025
SF-2035
SF-2018
SF-2022
SF-2027
SF-1025
SF-2035
SF-2018
SF-2022
SF-2027
SF-2025
SF-2030
SF-1125
Version P/G No.
20 -24
18 -24
20 -61
18 -61
20 -58
18 -58
20 -82
All
20
18
20 -54
18 -54
20 -53
18 -53
33 -61
Current parts New parts
Parts code Parts code
CSPRP1932FC01 MSPRP2377FCZZ AF Suction lift plate spring
NROLP0898FCZ1 NROLP1117FCZZ AX PS Roller upper
NROLR0899FCZ1 NROLR1118FCZZ AZ PS Roller lower
LX-WZ0052FCZZ LX-WZ0117FCZZ AB Washer
MLEVP0600FCZZ MLEVP0698FCZZ AF PPD2 Actuator
PCLC-0204FCZZ PCLC-0242FCZZ AW PS Clutch
PSHEP4085FCZZ Discontinued — Folded corner prevention mylar sheet. 6
Price
rank
Parts name
Effec-
tive
time
Mid-
’96/12
Inter-
change-
ability
Note
3
4/4
SF-2040
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. C urr e nt t y pe c a n be u s ed i n place of n ew type .
New ty pe cann ot be us ed in place of curr ent type .
3. C urr e nt type c a nn ot b e us e d in p l ac e o f ne w ty p e.
New t y pe c a n be u s ed i n pl a ce of cur ren t type.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
32 -61
5. Interc ha ng ea ble i f r ep l ace d wi th s a m e typ es of
relate d pa r ts in us e.
6. Others.
!
Loading...