Date: Mar. 6, 1997
COPIER : SF-2118
1.MEASURE TO ALLEVIATE PROBLEMS OF SNAGGING OF THE ACTUATOR.
2.MEASURE TO ALLEVIATE PROBLEMS THAT HAVE OCCURRED WHEN USING
THICK COPY PAPER WITH THE MULTI-MANUAL COPY PAPER FEEDING UNIT.
3.CHANGE IN THE DRIVE FRAME UNIT.
No. : SP-2090
1. Measure to alleviate problems of snagging of the actuator.
1.Model Name: SF-2118/ 1018/2020/2120/1020/1 120/CM15/CM16
2.General: Problems have occurred with the actuator becoming snagged when the right cabinet of
the lower cassette is opened and closed in the models listed above, preventing the
opening and closing movements of the right cabinet to be carried out smoothly. As a
measure to alleviate this problem, spacers have been added, and a change has been
carried out in the direction that the actuator is facing.
3.Description: Added sensor spacer: PSP AZ0712FCZ Z (Q’ty: 0 → 1)
Attachment standard for the sensor spacer FD.
∗ After chec ki ng t o m a ke sure that the attachment surfaces a re fr ee of dirt or
dust, etc., pressure should be applied to firmly attach the spacer.
Marking
Standard
Sensor spacer FD
PSPAZ0172FCZZ
A large black dot //// has
been marked in this area.
Standard
4.Action: ∗ For machines other than those listed below: From 1996 September production.
Japanese production: From 1996 mid-October production.
SF-2118/1018 Chinese production: From 1996 November production.
SMF production: From 1997 January production.
SHARP CORPORATION Reprography Division
1/3
Green
C
2. Measure to alleviate problems that have occurred when using thick copy paper with
the multi-manual copy paper feeding unit.
1.Model Name: SF-MF15
2.General: There have been problems of the leading edge of the copy paper slowing down when
128 g copy paper is passed through the multi manual copy paper feeding unit during
copy paper feeding operations in the models listed above. As a measure to alleviate
this problem, a manual copy paper feed adjustment plate has been added.
3.Description: Manual adjustment plate AS:CPLTP5276FC01(Q’ty: 0 → 1)
Manual multi copy paper feeding unit
(SF-MF15)
Copy paper
feeding roller
* Manual adjustment plate AS
Multi manual
upper PG
Copy paper
feeding roller
* Manual
adjustment
plate As
Multi manual lower PG
Multi manual
lower PG
Multi manual
upper PG
4.Action: From 1996 October production.
3. Change in the drive frame unit.
1.Model Name: SF-2116/ 21 18/1016/1018
2.General: The change described below has been carried out in the models listed above as a
measure to improve productivity.
3.Description: M3 × 8 Bind: XBBSD30P08000 (Q’ty: 2 → 1)
4.Action: From 1996 November production.
2/3
Discontinued
Ref.
Model
No.
SF-2018
SF-1018
1
SF-2020
SF-2120
SF-1020
SF-1120
2 SF-MF15
SF-2116
SF-2118
3
SF-1016
SF-1018
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Curr e nt t y pe ca n be u sed i n p la c e of n ew t y pe .
3. Curr ent type ca nnot be use d in plac e of ne w typ e.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
name
23
33
All
23 CPLTP5276FC01 AG
7 -20
New ty pe cann ot be us ed i n place of curr ent type .
New t y pe c a n be u sed in p la c e of c u rr en t ty p e.
!
Current parts New parts
Parts code Parts code
PSPAZ0712FCZZ AC Sensor spacer ∗
—
XBBSD30P08000
Q’ty: 2 → 1
5. Interchangeable if replaced with same types of
relate d parts in use .
6. Othe r s .
Price
Parts name
rank
Manual
adjustment plate
AA Screw M3 × 8
Effec-
tive
time
1st lot
’96/10
1st lot
’96/11
Inter-
change-
ability
6
Note
3/3
Loading...