SHARP SP2071 Technical Report

Date: Nov. 12, 1996

COPIER : SF-2116/1016/CM15/UB15

1.CHANGE IN THE TRAY INSTRUCTION LABEL OF THE 250 TRAY AS A MEASURE TO
ESTABLISH INTERCHANGEABI LITY.

2.STANDARDIZATION OF THE OPERATION PWB R AS A MEASURE TO IMPROVE
PRODUCTIVITY.

3.CHANGE IN THE ASSEMBLY SCREWS OF THE MAIN DRIVE UNIT.

1. Change in the tray instruction label of the 250 tray as a measure to establish
interchangeability.

1.Model Name: SF-2116/ 21 18/CM15/UB15
SF-1016/1018

No. : SP-2071

2.General: The tray instruction label has been changed as a measure to establish
interchangeability with other models.

Changed tray instruction label

3.Action: From 1996 mid-June production.

2. Standardization of the operation PWB R as A measure to improve productivity.

1.Model Name: SF-2116/ 21 18
SF-1016/1018

2.General: Standardization of the operation PWB R has been carried out. This change has been
carried out as a measure to improve productivity. In accordance with this change
standardization of the part codes has also been carried out.

Operation PWB R (CPWBF1095FC55) → (CPWBF1095FC56)

Changed to

3.Action: ∗1 Japanese production: From the start of 1996 June production.
French (SMF) production: Running change.

SHARP CORPORATION Reprography Division

1/3

Green

C

3. Change in the assembly screws of the main drive uni

1.Model Name: SF-2116/ 21 18
SF-1016/1018

2.General: There have been some problems which have occurred in the main drive unit.
The assembly screws of the main drive unit sometimes cannot be properly tightened.
To alleviate these problems a change has been carried out in the assembly screws.

Screw (M4 x 8) XHBSE40P08000 (Q’ty: 1)

↓ Changed to

Screw (M4 x 8) XBBSD40P08000

Screw (M3 x 8) XHBSE30P08000 (Q’ty: 2)

↓ Changed to

Screw (M3 x 8) XBBSD30P08000

3.Action: ∗2 Japanese production: From 1996 mid-April production.
Chinese (SOCC) production: From 1996 mid-April production.
French (SMF) production: From 1996 mid-April production.

2/3