SHARP SP2064 Technical Report

Date: Nov. 12, 1996

COPIER : SF-7320/7370

1.CHANGE IN THE TC CASE SHEET.

2.CH ANGE IN THE LONG HOL E OF THE MANUAL PAPER FEE DI NG ARM B AS AN IM PROVEMENT MEASU RE.

1. Change in the TC case sheet.

1.Model Name: SF-7320/7370

2.General: An adhesive type TC case sheet was established as an improvement measure to

prevent copy paper from becoming inserted and caught inside the TC case. The adhesive surface sometimes caused problems of white streaks on the copy images, however, and as an improvement measure to alleviate these problems, the size of the adhesive face of the TC case sheet has been changed to a smaller one.

No. : SP-2064

The area designated by the diagonal lines has been cut so that the distance will be from 4 to 5 mm.

SHARP CORPORATION Reprography Division

1/2

Green

2. Change in the long hole of the manual paper feeding arm B as an improvement measure.

1.Model Name: SF-7370

2.General: The long hole of the manual paper feeding arm B has been lengthened by 1 mm as an

improvement measure for the 100 sheets machine. This measure has been carried out so that the same manual paper feeding arm B can be used with the models listed above.

Manual paper feeding arm B (MARMM0092FCZZ) → (MARMM0092FCZ1)

3.Action: From 1996 mid-January production.

Ref.

Model

No.

SF-7320

SF-7370

2 SF-7370

1. Interchangeable. 4. Not interchangeable.

2. Curre nt t y pe c a n be u s ed in p la c e of n ew type. New ty pe cann ot be us ed i n place of curr ent type .

3. Curre nt ty pe cann ot be us ed i n place of new ty pe. New t y pe c a n be u sed in p la c e of c u rr en t ty p e.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

name

Version P/G No.

20 -27 PSHEP3830FCZZ PSHEP3830FCZ1 AE

All

17 -47 MARMM0092FCZZ MARMM0092FCZ1 AC

Current parts New parts

Parts code Parts code

Changed to

Effec-

Price

5. Interchangeable if replaced with same types of relate d parts in use .

6. Other s .

Parts name

rank

TC assistance sheet

Manual paper feeding arm B

Inter-

tive

change-

time

ability

—3

Mid-

’96/1

Note

2/2