SHARP SP2053 Technical Report

Date: Nov. 5, 1996
COPIER : SF-2022
1.CHANGE IN REVERSION SOLENOID.
2.ADD ITION OF A SCRE W I N THE BL PWB UNIT.
3.CHAN GE IN THE A TTACHMENT E- RING OF THE PAPE R D E LI VERY REVERSION UNIT.
1. Change in reversion solenoid.
1.Model Name: SF-2022/2035/2027
2.General: Problems have occurred with the solenoid attachment plate becoming distorted or
misshapen due to heat caused by the rise in temperature of the reversion solenoid during continuous double-side copy operations when carried out for an extended period of time in the machines listed above. As a measure to alleviate this problem the solenoid has been changed to the solenoid used in models SF-2025/2030/2040 which has a larger coil resistance value.
No. : SP-2053
3.Description: Old RPLU-0241FCZZ
New RPLU-0310FCZZ
4.Action: From the start of 1996 July production.
SHARP CORPORATION Reprography Division
1/3
Green
C
2. Addition of a screw in the BL PWB unit.
1.Model Name: SF-2022/2027/1025/2035/2025/2030/2040/1125
2.General: Problems have occurred in the models listed above with the BL retainer in the BL PW B
unit falling out and becoming wrapped and tangled with parts such as the drum. To alleviate these problems the measure described below has been carried out.
3.Description: The BL retainer has been secured to the BL holder by two screws (XUBSD20P04000) as illustrated in the figure shown below.
XUBSD20P04000
BL retainer
4.Action: From the start of 1996 July production.
3. Change in the attachment E-ring of the paper delivery reversion unit.
1.Model Name: SF-1125/ 2025/2030/2040/1025/2022/2027/2035
2.General: The attachment E-ring in the paper delivery reversion unit has been changed as a
measure to improve operationability during the production process of the models listed above. The attachment E-ring has been changed from a metal E-ring to a plastic one.
3.Action: From 1996 mid-August production.
2/3
Loading...
+ 1 hidden pages