Model / MarketIC (ROM)LCD control PWBIC (ROM)LCD control PWB
SF-2030 / JapaneseVHI27C01055FCCPWBN1142FC58
SF-2030 / EnglishVHI27C01056FCCPWBN1142FC59
SF-2030 / GermanVHI27C01057FCCPWBN1142FC60
SF-2030 / FrenchVHI27C01058FCCPWBN1142FC61
SF-2030 / SpanishVHI27C01059FCCPWBN1142FC62VHI27C01071FCCPWBN1142FC65
SF-2030 / All marketsVHI27C51276FCVHI27C51294FC
SF-2040 / JapaneseVHI27C51271FCCPWBN1141FC51VHI27C51288FCCPWBN1141FC57
SF-2040 / English (100V)
SF-2040 / English (200V)CPWBN1161FC51CPWBN1161FC55
SF-2040 / Spanish (100V)
SF-2040 / Spanish (200V)CPWBN1161FC54CPWBN1161FC58
SF-2040 / German (100V)
SF-2040 / German (200V)CPWBN1161FC52
SF-2040 / French (100V)
SF-2040 / French (200V)CPWBN1161FC53
SF-2040 / All marketsVHI27C51270FCVHI27C51293FC
VHI27C51272FC
VHI27C51275FC
VHI27C51273FC
VHI27C51274FC
CPWBN1141FC52
CPWBN1141FC55
CPWBN1141FC53
CPWBN1141FC54
VHI27C01070FCCPWBN1142FC64
VHI27C51289FC
VHI27C51292FC
VHI27C51290FCCPWBN1161FC56
VHI27C51291FCCPWBN1161FC57
CPWBN1141FC58
CPWBN1141FC59
The new IC (ROM) can be used with old PWBs as well.
4.Action:Japanese production:From the first unit of June, 1996 production.
Chinese (SOCC) production:From the first unit of July , 1996 production.
2. Preventing screw contact with the DV hopper unit during insertion.
1.Model Name:SF-2025/2030/2040
2.General:During insertion into the main unit, the DV hopper unit may
come into contact with the screw fastening the frame cover
1 -23
(P/G ). To prevent this, we have changed the shape
of the insertion opening for the screw as indicated to the right.
(As a temporary measure, the old frame cover may still be used with a flat screw.)
3.Action:From the first unit of June, 1996 production.
2/5
3. Preventing JAMs in the delivery reverse unit.
1.Model Name:SF-2022/2027/2035/2025/2030/2040
2.General:The secondary motion roller spring used in the delivery reverse unit sticks out past the
paper guide rib. Paper may get caught on it, causing jams. We are changing the shape
to prevent this problem.
3.Action:From June, 1996 production (running change).
4. A change to the operation panel unit smoke filter.
1.Model Name:SF-2030
2.General:In order to make it easier to distinguish top and bottom, and as a result of
improvements to prevent warping, we have changed the shape of the smoke filter used
in the operation panel unit.
3.Action:From April, 1996 production (running change).
5. A change to the shape of the rear outer cover. (To improve servicing)
1.Model Name:SF-2025/2030/2040
2.General:We have been informed that it is difficult to repair the harness while the desk is
attached due to interference from the rear outer cover. We have added a slit to the rear
outer cover and have changed its shape to make it easier to make the necessary cuts
during harness repair.
3.Action:From the middle of June, 1996 production.