Date: Oct. 7, 1996
COPIER (OPTION) : SF-S53
No. : SP-2037
1.SF-S53 SPECIFICATION CHANGES.
2.PART GUIDE REVISION.
1. SF-S53 specification changes.
1.Model Name: SF-S53
2.General: Since it is possible to install the SF-S53 in the SF-2025/2030/2040, we are establ is hing
a new model, the SF-S53N. In cases where the regular SF-S53 is installed in the
SF-2040 and SF-D23, the following parts or kits are necess ar y.
USA, UK, Australia SEEG, Canada, other
Plate mounting unit 0GZ4F10212000 →
Mounting rail 0GZ4A10902000 →
Stopper assy 0GZ4F10211000 →
Installation stand 0GZ4A10958000 →
Card (English) 0GZSSGN1026S1 —
Card (Four language) — 0GZSSGN1027S1
Kit code 0GZSSGN1024S1 0GZSSGN1025S1
In addition, to install the regular SF-S53 in the SF-2035 and S F-2030, change the IC
(ROM) in the sorter controller PWB to version 15 and tur n on DIP switch 5.
SHARP CORPORATION Reprography Division
1/3
Green
C
2. Part guide revision.
1.Model Name: SF-S53
2.General: There were some misprints in the part guide. Please make the revisions indicated below.
Staple sorter mainbody 1
2/3
Part code and measurement misprints.
A 0GZXD32200142 (2 X 14) → 0GZXD32200222 (2 X 22)
B 0GZXD32200142 (2 X 14) → 0GZXD32200182 (2 X 18)