Date: Aug. 1, 1996
COPIER : SF-2116
No. : SP-2031
CHANGES AND ADDITIONS OF PARTS.
1.Model Name: SF-2116/ 21 18/1016/1018
2.General: Some changes and additions have been carried out on some of the parts in the models
listed above, and are hereby reported.
Ref.
No.
1
2
3
Model
name
SF-2116
SF-2118
SF-1016
SF-1018
SF-2116
SF-2118
SF-1016
SF-1018
SF-2116
SF-2118
SF-1016
SF-1018
SF-2116
SF-2118
SF-1016
SF-1018
SF-2116
SF-2118
SF-1016
SF-1018
SF-2116
SF-2118
SF-1016
SF-1018
SF-2116
SF-2118
SF-1016
SF-1018
Version P/G No.
16 -13 LFRM-0842FCZZ LFRM-0842FCZ1 AP
All
1
All
23 -16 MLEVP0682FCZZ MLEVP0682FCZ1 AC W base actuator
All
21 PSHEP4055FCZZ
38 PSHEP4056FCZZ
Current parts New parts
Parts code Parts code
PTPE-0220FCZZ
(Q’ty: 2)
Discontinued —
LPLTM5164FCZZ
(Q’ty: 2)
—
PTPE-0226FCZZ
(Q’ty: 2)
Discontinued —
Price
Parts name
rank
Fusing upper
frame
Hook tape
Hook protection
plate
AC Hook tape N
Transport guide
sheet 1
Transport guide
sheet 2
Effec-
Inter-
tive
change-
time
ability
∗11
See
5
text
∗25
Reasons for changes
A change in shape has been carried
out as a measure to improve the load
on the bearings. (improvement of L4)
A change has been carried out in the
hook tape and the hook protection
plate installed in the hook section of
the upper cabinet left (P/G ) as
a measure to alleviate problems of
cracking in the cabinets due to
vibrations.
A sheet which had previously been
attached has been discontinued as a
change in the shape of the actuator.
This change has been carried out as a
measure to improve the detection
performance.
1-4
1/2
SHARP CORPORATION Reprography Division
Green
C
Ref.
No.
3
Model
name
SF-2116
SF-2118
SF-1016
SF-1018
SF-2116
SF-2118
SF-1016
SF-1018
Version P/G No.
38 PSHEP4057FCZZ Discontinued —
All
23 PMLT-1000FCZZ PMLT-1000FCZ1 AC
Current parts New parts
Parts code Parts code
Price
rank
Parts name
Transport guide
sheet 3
Damper cushion
W
Effec-
Inter-
tive
change-
time
ability
∗25
∗33
Reasons for changes
A sheet which had previously been
attached has been discontinued as a
change in the shape of the actuator.
This change has been carried out as a
measure to improve the detection
performance.
A change in shape has been carried
out as a measure to improve the
movement performance of the calling
roller.
∗1 Japanese domestic production: From the start of 1995 October production.
Chinese (SOCC) production: From the start of 1995 mass production.
French (SMF) production: From the start of 1995 November production.
∗2 Japanese domestic production: From the start of 1996 April production.
Chinese (SOCC) production: From the start of 1996 May production.
French (SMF) production: From the start of 1996 June production.
∗3 Japanese domestic production: From the start of 1996 May production.
Chinese (SOCC) production: From the start of 1996 June production.
French (SMF) production: From the start of 1996 August production.
2/2