SHARP SP2007 Technical Report

Date: May. 13, 1996
COPIER : SF-2014
No. : SP-2007
1. MEASURES TO IMPROVE THE PERFORMANCE OF TH E MANUAL MULTI FEEDER.
2. CHANGE IN THE LOCKIN G SCREWS OF THE 4/5 MI RROR TO IMP ROVE OPERATION EFFICIENCY.
1. Measures to improve the performance of the manual multi feeder.
1.Model name: SF-2014/21 14/2214 SN-1420/1430 Z-800(Only for models bound for the USA.)
2.General: A change in the tolerance of the dimensions of the manual feed roller shaft diameter has been carried out in order to improve the performance of the manual multi feeder.
Old New ø5
-0.01
-0.05
ø5
0
-0.03
3.Action: Japanese production From the start of 1996 February production. Chinese production (SOCC) From the start of 1996 March production. French production (SMF) From the start of 1996 April production.
SHARP CORPORATION Reprography Division
1/2
Green
C
2. Change in the locking screws of the 4/5 mirror to improve operation efficiency .
1.Model name: SF-2014/21 14/2214 SN-1420/1430 Z-800(Only for models bound for the USA.)
2.General: Locking screws have been attached in order to secure the 4/5 mirror in the optical unit when shipping. A change has been carried out in the shape of the pins, however, to improve the efficiency of operations.
Old New
M4×0.7
3.Action: Japanese production
Running change from the start of 1996 February production.
Chinese production(SOCC)
Running change from the start of 1996 April production.
French production(SMF)
Running change from the start of 1996 May production.
Ref.
Model
No.
SF-2014 SF-2114 SF-2214
1
SN-1420 SN-1430 U.S.A.
Z-800 51 -14
SF-2014 SF-2114 SF-2214
2
SN-1420 SN-1430
Z-800 22 -104
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. C urr e nt t y pe c a n be u s ed i n p la ce of new t ype . New ty pe cann ot be us ed i n place of curr ent type .
3. C urre nt ty pe cann ot be used i n place of new ty pe. New t y pe c a n be u sed in p la c e of current ty p e.
Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
name
Version P/G No.
17 -34
All
53 -14
only
25 -104
All
U.S.A.
24 -104
only
!
2
(Tapered ends)
Current parts New parts
Parts code Parts code
NSFTZ2062FCZZ NSFTZ2062FCZ1 AL
LX-BZ0716FCZ1 LX-BZ0716FCZ2 AD
Price
rank
5. Interchangeable if replaced with same types of relate d parts in use .
6. Others .
φ3
Parts name
Manual feed roller shaft
4th, 5th mirror lock screw
Effec-
tive
time
Inter-
change-
ability
3
1
Note
2/2
Loading...