SHARP SP1994 Technical Report

Date: Mar. 11, 1996

COPIER : SF-2030

(Service Information)

No. : SP-1994

AN ADDITION TO THE SERVICE MANUAL

1.Model Name: SF-2030/2030H

2.General: We are adding some information regarding the service manuals of the above models.

3.Description: When changing the main PWB, it is necessary to set the language using the following

procedure. (The PWB’s from the part center, which are used for replacement, are always set to English display.)

A. Procedure

1. When you use SIM. 26-22 (C→P→O→P→2→6→PSW→2→2→PSW) to set the language, the following menu appears.

0.ENGLISH 1.JAP ANESE

2.GERMAN 3.FRENCH

2. Input the number of the desired language and press PSW.

B. The difference between this and the older machines. In the older machines, each language had a data ROM, and when SIM 26-06 was done, the language was set to the appropriate one for the market. However, the new models’ ROM includes English, Japanese, German, and French. Therefore, it is necessary to set both the market (SIM. 26-06) and the language (SIM 26-22) separately. The uses of SIM.26-06 and SIM.26-22: SIM.26-06: Sets the market for machine control (AB series or inch series; toner saving mode; etc.) SIM.26-22: Sets the market for the display.

SHARP CORPORATION Reprography Division

Green