SHARP SP1986 Technical Report

Date: Mar. 15, 1996

COPIER(OPTION) : SF-D19/D22

No. : SP-1986

ACTION TO PREVENT PINCHING OF THE HARNESS WIRE DURING ATTACHMENT OPERATIONS FOR THE REAR CABINET.

1.Model name: SF-D19/D22

2.General: A portion of the harness sometimes becomes pinched between the front and the rear

cabinet during attachment operations for the rear cabinet. To alleviate this problem, a binding band was used as a temporary measure to fasten down the harness. As a permanent measure, however, a harness protection mylar has been added as shown in the figure below.

3.Description:

Main harness DHAI-2034FCZZ

Harness protection mylar

4.Action: From the start of 1995 October production.

SHARP CORPORATION Reprography Division

1/2

Green

Ref.

No.

Model

name

Version P/G No.

Current parts New parts

Parts code Parts code

Price

rank

Parts name

Effec-

tive

time

Inter-

change-

ability

Note

SF-D19

SF-D22

1. Interchangeable. 4. Not interchangeable.

2. C urr e nt t y pe c a n be u s ed i n p la ce of new ty pe . New ty pe cann ot be us ed i n place of curr ent type .

3. C urre nt ty pe cann ot be used i n place of new ty pe. New t y pe c a n be u sed in p lac e of c u r ren t ty p e.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

specified ones for maintaining the safety and performance of the set.

All

— PSHEP4111FCZZ AF

5. Interchangeable if replaced with same types of relate d parts in use .

6. Others.

Harness protection mylar

1st lot ‘95/10

—

2/2