SHARP SP1977 Technical Report

Date: Dec. 15, 1995

DUPLICATOR : SD-2050

No. : SP-1977

CHANGES TO THE TONER AGITATOR SPRING ANGLE (TO IMPROVE PRODUCTIVITY)

1.Model Name: SD-2050, SF-2050

2.General: In order to reduce problems putting together the unit, we have changed the size of the

opening in the toner agitator spring angle.

φ3.5 φ3

3.Action: From the middle of October, 1995 production (running change)

Ref.

Model

No.

SF-2050 All

1. Interc ha ng ea bl e. 4. Not int erc h an ge ab l e.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with

specifi e d on es fo r m ain ta in i ng t he s a fe ty an d pe r fo rma nc e o f th e s et .

name

Version P/G No.

18 -25 LANGT1306FCZZ LANGT1306FCZ1

18 -27 LANGT1307FCZZ LANGT1307FCZ1

Current parts New parts

Parts code Parts code

5. Interchangeable if replaced with same types of

6. Others.

Price

rank

Toner stirring spring angle A

Toner stirring spring angle B

relate d parts in use .

Parts name

Effec-

tive

time

See

text

Inter-

change-

ability

Note

SHARP CORPORATION Reprography Division

Green