SHARP SP1966 Technical Report

Date: Nov. 27, 1995

COPIER : SF-2014

No. : SP-1966

PREVENTING THE SPF PAPER DELIVERY TRAY FROM COMING OFF.

1.Model Name: SF-2214

SN-1430 (USA version only)

2.General: As a result of the shock of the SPF opening and closing, paper delivery tray 2 sometimes comes off. The following changes have been made to prevent this problem.

3.Description: The rib where the two parts connect is being made longer, as shown below.

SPF paper delivery tray 2

SPF paper delivery tray 1

Some machines may have a spacer attached to the front side of portion B in the above figure. When switching to the new paper delivery tray 2, remove this spacer .

4.Action: ∗ Japanese production: From the middle of Dec., 1995 production. Chinese production(SOCC): From Oct., 1995 production. French production(SMF): From the middle of Dec., 1995 production.

Ball R4

Currently

1mm

Detail of Part A

This is effective both on the left and right sides (2 locations).

After the change

2mm

SHARP CORPORATION Reprography Division

1/2

Green

Ref.

Model

No.

SF-2214 All

SN-1430

1. Interc ha ng ea bl e. 4. N ot i nt er ch an ge ab l e.

2. Current type can be used in place of new type. New type cannot be used in place of current type.

3. Current type cannot be used in place of new type. New type can be used in place of current type.

Parts marked with “ ” is important for maintaining the safety of the set. Be sure to replace these parts with speci fied ones fo r mai n ta in i ng t he s a fe ty an d pe rf o rma nc e o f th e s et .

name

Version P/G No.

U.S.A.

3 -37

only

Current parts New parts

Parts name

Parts code Parts code

LSOU-0140FCZZ LSOU-0140FCZ1 AH SPF tray 2

Price

rank

5. Interchangeable if replaced with same types of relate d parts in use .

6. Others.

Effec-

tive

time

∗ 3

Inter-

change-

ability

Note

2/2