SHARP sp1960 Technical Report
COPIER (OPTION): SF-A54
Date
:
Nov. 24, 1995
1. Measures to prevent the back sides of original copies from becoming dirty.
1.Model name: SF-A54
No. : SP-1960
1.MEASURES TO PREVENT THE BACK SIDES OF
ORIGINAL COPIES FROM BECOMING DIRTY.
2.ESTABLISHMENT OF ADDITIONAL SERVICE
PARTS.
2.General: The parts listed below have been established as service parts in order for the parts
which have been used to improve the
problem of the backsides of original
copies from becoming dirty in the
SF-A55 (SF-2050 RADF), so that they
can be used for the same purpose in
model SF-A54 (SF-2022/2027/2035).
The separating section of model SF-A55
shown in the figure to the right has been
established as a separating unit
(0CW2198K052//) and offered as a
service part.
The three parts listed below have also
been established as a kit and offered as service parts in reply to the needs of the
markets.
5 -92
5 -50
Separating field kit
(0CW2198K179A/).
3.Action: From the start of 1995 September production.
Separating unit (0CW2198K052//).
Separating mylar H (0CW2198P312//) P/G .
Paper feeding roller H (0CW2198P331//) P/G .
SHARP CORPORATION Reprography Division
1/2
Green
C
2. Establishment of additional service parts.
1.Model name: SF-S17/A15
2.General: Additional service parts have been established for the reasons described below.
3.Description:
Model name. Established parts. Reasons for establishment.
.
SF-S17.
SF-A15.
Tag card (for the UK, SEEG) (for Thailand
production).
.
Outer case (for the Japan domestic market)
(for Thailand production).
.
Outer case (for the overseas markets) (for
Thailand production).
. Dummy shaft.
Model SF-S17 is also to be produced in Thailand. This part has
been established as a service part in accordance with this fact.
This part has been established as a service part for Thailand
production.
(No changes have been carried out in the Japan domestic
production.)
This is a correction of an error in the parts code listed in the parts
guide.
Ref.
Model
No.
1 SF-A54 All
SF-S17
2
SF-A15
<Interchange>
1. Interchangeable. 4. Not interchangeable.
2. Current type can be used in place of new type.
3. Current type cannot be used in place of new type.
Parts marked with ‘‘ ’’ is important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
Version P/G No.
name
5
UK
SEEG
4
All
5 -47
New type cannot be used in place of current type.
New type can be used in place of current type.
Current parts New parts
Parts code Parts code
0CW2198K052// BM Separating unit
0CW2198K179A/ BR
----
0CW2199P305B/ 0CW2199P305// AG Dummy shaft
0CW4054P435// AX Tag card
0CW4054P434// BD
Price
5. Interchangeable if replaced with same types of
related parts in use.
6. Others.
Parts name
rank
Separating field
kit
Packing case
(for Thailand
production)
Effec-
tive
time
1st lot
’95/9
---- ---- ----
Inter-
change-
ability
6
Note
2/2
Loading...