SHARP SP1943 Technical Report
Date: Sep. 21, 1995
COPIER : SF-2118
[Service Information]
No. : SP-1943
SERVICE MANUAL CORRECTIONS.
1.Model name: SF-2116/ 2118/1016/1018
2.General: Errors occurred in Chapter 7, “Adjustments”, in the service manuals of the models listed
above. We would like to request that the respective corrections be noted and marked
in your service manuals.
3.Description: The following correction should be carried out in Entry 2-2 “Points of Caution and
Concern during Adjustments” of Part 2 “Optical Section” of Chapter 7 “Adjustments”.
2-2. Points of Caution and Concern during Adjustments.
a. It is possible to carry out individual adjustments of the exposure balance, blank lamp,
and copy edges, but all other adjustments should be carried out by following the
following flow chart.
2-2. Points of Caution and Concern during Adjustments.
a. It is Possible to carry out individual adjustments of the exposure balance,
blank lamp, and copy edges, but all other adjustments should be carried out
by following the following flow chart
Check the following preset values based on the lens focus distance rank (lens nember).
• Lens standard position sdjustment Sim 48-01
• No. 4 and no. 5 mirror standard position adjustment carried out manually
• Horizontal copy magnification Enlargement Sim 48-01- %
Reduction Sim 48-01- %
Vertical Enlargement
Reduction
SHARP CORPORATION Reprography Division
Green
C
Loading...